ATM60-AAN12X12

Specification: Part Number 1033169 Start up torque with shaft seal: 1.2 Ncm Operating voltage range: 10 V ... 32 V Moment of inertia of the rotor: 55 gcm² Housing material: Die-cast aluminum Max. angular acceleration: 500,000 rad/s² EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Code sequence: CW/CCW Operating torque with shaft seal: 0.8 Ncm Max. number of revolutions: 4,096 Bearing lifetime: 3.6 x 10^9 revolutions Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Power consumption max. without load: 0.8 W SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Connection type: Cable, 12-pin, radial, 10 m Storage temperature range: -40 °C ... +100 °C, without package Permissible relative humidity: 98 % Error limits: ± 0.25 ° Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Initialization time: 1,050 ms Max. number of steps per revolution: 4,096 Electrical interface: SSI Clock frequency: 1 MHz Interface signals: Clock +, Clock -, Data +, Data-, Programming interface: RS-422 Shaft diameter: 6 mm, 1/4 " 8 mm, 3/8 " 10 mm, 1/2 " 12 mm 14 mm 15 mm Code type: Binary, Gray Working temperature range: -20 °C ... +85 °C Mechanical interface: Blind hollow shaft Resolution power: 4,096 x 4,096 Measuring step: 0.043 ° Mass: 0.4 kg Resolution: 12 bit x 12 bit Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Repeat accuracy: 0.1 ° Shaft material: Stainless steel Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Flange material: Aluminum