ATM60-AAA12X12

Specification: Part Number 1030009 Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Code sequence: CW/CCW Max. number of revolutions: 4,096 Mass: 0.4 kg Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Moment of inertia of the rotor: 55 gcm² Initialization time: 1,050 ms Resolution power: 4,096 x 4,096 Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal EMC: (according to EN 61000-6-2 and EN 61000-6-3) Operating voltage range: 10 V ... 32 V Start up torque with shaft seal: 1.2 Ncm Flange material: Aluminum MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Measuring step: 0.043 ° SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Permissible relative humidity: 98 % Power consumption max. without load: 0.8 W Interface signals: Clock +, Clock -, Data +, Data-, Programming interface: RS-422 Code type: Binary, Gray Max. angular acceleration: 500,000 rad/s² CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Shaft material: Stainless steel Mechanical interface: Blind hollow shaft Clock frequency: 1 MHz Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Resolution: 12 bit x 12 bit Storage temperature range: -40 °C ... +100 °C, without package Connection type: Connector M23, 12-pin, radial Repeat accuracy: 0.1 ° Max. number of steps per revolution: 4,096 Housing material: Die-cast aluminum Operating torque with shaft seal: 0.8 Ncm Bearing lifetime: 3.6 x 10^9 revolutions Working temperature range: -20 °C ... +85 °C Electrical interface: SSI Error limits: ± 0.25 ° Shaft diameter: 6 mm, 1/4 " 8 mm, 3/8 " 10 mm, 1/2 " 12 mm 14 mm 15 mm