AHM36B-S1CC012x12

Specification: Part Number 1065992 Address setting: 0 ... 127 Resolution power: 4,096 x 4,096 MTTFd: mean time to dangerous failure: 270 a (EN ISO 13849-1) Electrical interface: CANopen Error limits: ± 0.35 ° (at 20°C) Max. number of revolutions: 4,096, number of revolutions from 1 to 4,096 programmable Flange material: Aluminum Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Shaft diameter: 6 mm Initialization time: 2 s Max. angular acceleration: 500,000 rad/s² EMC: (according to EN 61000-6-2 and EN 61000-6-3) Operating voltage range: 10 V ... 30 V Mechanical interface: Solid shaft, Servo flange Measuring step: ± 0.09 ° (360 ° / number of steps) Bus: CANopen® Resolution: 12 bit x 12 bit PDO data: Speed, Position, Temperature Bearing lifetime: 3.6 x 10^8 revolutions Shaft material: Stainless steel Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side Moment of inertia of the rotor: 2.5 gcm² Permissible relative humidity: 90 % (Condensation not permitted) Maximum operating speed: 6,000 /min Parameterising data: Abtastrate für Geschwindigkeitsberechnung, Number of revolutions, Einheit für Ausgabe des Geschwindigkeitswerts, PRESET, Number of steps per revolution, Zählrichtung Operating torque: < 0.5 Ncm (+20 °C) Reverse polarity protection: 1 Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Connection type: Connector M12, 5-pin, universal Power consumption: Without load Repeat accuracy: ± 0.25 ° (at 20°C) Working temperature range: -20 °C ... +70 °C Bus termination: Via external termination resistance Status information: CANopen Status über Status-LED Housing material: Zinc Storage temperature range: -40 °C ... +100 °C, without package Start up torque: 0.5 Ncm (+20 °C) Power consumption max. without load: 1.5 W Max. number of steps per revolution: 4,096, number of steps from 1 to 4,096 programmable Encoder profile: CANopen CiA DS-301 V4.02, CiA DSP-305 LSS, Encoder Profile: - CIA DS-406, V3.2. - Class C2 Shaft length: 12 mm Data transmission rate (baud rate): 20 kbit/s ... 1,000 kbit/s, default: 125 kbit/s Mass: 0.12 kg (for an encoder with connector outlet) Permissible Load capacity of shaft: 20 N (axial), 40 N (radial)