AHM36A-S1PK014x12

Specification: Part Number 1066008 Code type: Binary, Gray Shaft material: Stainless steel Resolution: 14 bit x 12 bit Parameterising data: Number of revolutions (only Multiturn version), Code type, Position Errorbit, PRESET, Endless operating functionality (only Multiturn version), Number of steps per revolution, SSI mode, Verschiebung Positionsbits, Zählrichtung Shaft diameter: 6 mm Operating voltage range: 4.5 V DC ... 32 V DC Repeat accuracy: ± 0.2 ° (at 20°C) Maximum operating speed: 6,000 /min Operating torque: < 1 Ncm (+20 °C) Connection type: Cable, 8-wire, universal, 1.5 m Clock frequency: 2 MHz Max. number of revolutions: 4,096, number of revolutions from 1 to 4,096 programmable Error limits: ± 0.35 ° (at 20°C) Bearing lifetime: 3.6 x 10^8 revolutions Measuring step: ± 0.022 ° (360 ° / number of steps) CW/CCW (counting sequence when turning): L-active (L = 0 - 1 V, H = 2,0 - Us V) Max. angular acceleration: 500,000 rad/s² Permissible relative humidity: 90 % (Condensation not permitted) Material, cable: PUR Storage temperature range: -40 °C ... +100 °C, without package Start up torque: 1 Ncm (+20 °C) Electrical interface: SSI Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) MTTFd: mean time to dangerous failure: 230 a (EN ISO 13849-1) Power consumption max. without load: 1.5 W EMC: (according to EN 61000-6-2 and EN 61000-6-3) Code sequence: CW/CCW Flange material: Aluminum Reverse polarity protection: 1 Max. number of steps per revolution: 16,384, number of steps from 1 to 16,384 programmable Working temperature range: -40 °C ... +100 °C Shaft length: 12 mm Moment of inertia of the rotor: 2.5 gcm² SET (electronic adjustment): H-active L = 0 - 3 V, H = 4.0 - Us V Interface signals: Clock +, Clock -, Data +, Data- Permissible Load capacity of shaft: 20 N (axial), 40 N (radial) Enclosure rating: IP 66 / IP 67 (according to IEC 60529), housing side, IP 66 / IP 67 (according to IEC 60529), shaft side Power consumption: Without load Resolution power: 16,384 x 4,096 Initialization time: 100 ms Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Housing material: Zinc Mechanical interface: Solid shaft, Servo flange