AHM36A-S3PK014x12

Specification: Part Number 1066006 Moment of inertia of the rotor: 2.5 gcm² Measuring step: ± 0.022 ° (360 ° / number of steps) Working temperature range: -40 °C ... +100 °C Code type: Binary, Gray Enclosure rating: IP 66 / IP 67 (according to IEC 60529), housing side, IP 66 / IP 67 (according to IEC 60529), shaft side Storage temperature range: -40 °C ... +100 °C, without package MTTFd: mean time to dangerous failure: 230 a (EN ISO 13849-1) Connection type: Cable, 8-wire, universal, 1.5 m Power consumption: Without load Electrical interface: SSI Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Interface signals: Clock +, Clock -, Data +, Data- Clock frequency: 2 MHz Permissible Load capacity of shaft: 20 N (axial), 40 N (radial) Permissible relative humidity: 90 % (Condensation not permitted) Mechanical interface: Solid shaft, Face mount flange SET (electronic adjustment): H-active L = 0 - 3 V, H = 4.0 - Us V Parameterising data: Number of revolutions (only Multiturn version), Code type, Position Errorbit, PRESET, Endless operating functionality (only Multiturn version), Number of steps per revolution, SSI mode, Verschiebung Positionsbits, Zählrichtung Maximum operating speed: 6,000 /min Initialization time: 100 ms Housing material: Zinc Operating voltage range: 4.5 V DC ... 32 V DC Resolution power: 16,384 x 4,096 Repeat accuracy: ± 0.2 ° (at 20°C) Shaft diameter: 6 mm Max. number of revolutions: 4,096, number of revolutions from 1 to 4,096 programmable Max. angular acceleration: 500,000 rad/s² Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Max. number of steps per revolution: 16,384, number of steps from 1 to 16,384 programmable Flange material: Aluminum Reverse polarity protection: 1 Operating torque: < 1 Ncm (+20 °C) Material, cable: PUR Shaft material: Stainless steel Shaft length: 12 mm Bearing lifetime: 3.6 x 10^8 revolutions Power consumption max. without load: 1.5 W CW/CCW (counting sequence when turning): L-active (L = 0 - 1 V, H = 2,0 - Us V) Code sequence: CW/CCW EMC: (according to EN 61000-6-2 and EN 61000-6-3) Error limits: ± 0.35 ° (at 20°C) Resolution: 14 bit x 12 bit Start up torque: 1 Ncm (+20 °C)