ATD 2A A 4 Y 7

Connection Connector M23 type 2, 12-pin Protection DIN EN 60529 IP 65 Materials Housing: aluminium Shaft: stainless steel Function Singleturn Multiturn Resistance DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 30 g, 11 ms Interference immunity DIN EN 61000-6-2 Interface analog IS (current output, 4...20 mA) IE (current output, 0...20 mA) US (voltage output, 0...10 VDC) UE (voltage output, -10...+10 VDC) UT (voltage output, 0...5 VDC) UR (voltage output, -5...5 VDC) Operating speed ≤8000 rpm (mechanical) ≤6000 rpm (electric) Number of turns 1024 / 10 bit Emitted interference DIN EN 61000-6-3 Weight approx. 325 g Measuring range 90°, 180°, 360° 2, 4, 8, 16...1024 revolutions Steps per turn 16384 / 14 bit Load resistor ≥1 k&;8486; (recommended 10 k&;8486;) / voltage output ≤500 &;8486; (recommended 470 &;8486;) / current output Consumption w/o load ≤70 mA (24 VDC) Operating temperature -20...+85 °C manufacter SKU ATD 2A A 4 Y 7 Reverse polarity protection Yes Size (flange) ø58 mm Relative humidity 90 % non-condensing Motor shaft tolerance 0.25 mm axial 0.1 mm radial Output stages Voltage output (short-circuit proof) Current output (short-circuit proof) Code sequence CW: ascending values with clockwise sense of rotation; looking at mounting surface Mounting kit 002 Starting torque ≤0.02 Nm (+20 °C) Voltage supply +UB= 12...30 VDC (IS-/IE-/US-/UT-version) -UB= -12...-26 VDC / +UB 12...30 VDC (UE-/UR-version) Shaft type ø10 mm (through hollow shaft) ø12 mm (through hollow shaft) ø14 mm (through hollow shaft) Updating values ≤130 µs Sensing method Optical Resolution 16 bit