PFG19-E1CM1029

Specification: Part Number 1061022 Measuring range: 0 m ... 10 m Working temperature range (encoder): -30 °C ... +70 °C Resolution (wire draw + encoder): 0.034 mm Spring return force: 9 N ... 12 N Encoder: Incremental encoders Mounted mechanic: MRA-G190-110D3 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Wire acceleration: 8 m/s² Hysteresis: ≤ 0.4 mm Electrical interface: HTL/Push pull Life of wire draw mechanism: 1 million cycles Mounted encoder: DFS60 Part number encoder: 1037616 Mass (mechanics): 1.9 kg Mass (measuring wire): 1.2 g/m Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Enclosure rating encoder: IP 67 Housing material, wire draw mechanism: Plastic, Noryl MTTFd: mean time to dangerous failure: 300 a Measuring wire diameter: 0.55 mm Part number mechanic: 5326242 Operating speed: 4 m/s Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Linearity: ≤ ± 2 mm Working temperature range (mechanics): -30 °C ... +70 °C Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Reference signal, number: 1, electronically, gated with A and B Connection type: Male connector M12, 8-pin, radial Power consumption: 0.7 W Maximum load current: 30 mA Enclosure rating mechanic: IP 50 Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Actual length of cable extension: 10.2 m Reference signal, position: Electronically, gated with A and B Supply voltage: 4.5 V ... 32 V Repeatability: ≤ 0.2 mm Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Pulses per revolution: 16,384 Maximum output frequency: 600 kHz Length of wire pulled out per revolution: 555 mm Mass (including encoder): 2.2 kg