PFG13-A1AM0544

Specification: Part Number 1061016 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Length of wire pulled out per revolution: 385 mm Spring return force: 4.5 N ... 7 N Operating speed: 4 m/s Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Supply voltage: 4.5 V ... 32 V Mass (mechanics): 800 g Housing material, wire draw mechanism: Plastic, Noryl Encoder: Incremental encoders Pulses per revolution: 16,384 Measuring wire diameter: 0.55 mm Reference signal, position: Electronically, gated with A and B Resolution (wire draw + encoder): 0.023 mm Working temperature range (encoder): -30 °C ... +70 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Enclosure rating encoder: IP 67 Connection type: Connector M23, 12-pin, radial Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Part number mechanic: 5322779 Reference signal, number: 1, electronically, gated with A and B Life of wire draw mechanism: 1 million cycles Mounted encoder: DFS60 Maximum output frequency: 600 kHz Linearity: ≤ ± 2 mm Actual length of cable extension: 5.2 m Power consumption: 0.7 W Electrical interface: 4.5 V ... 5.5 V, TTL/RS422 Working temperature range (mechanics): -30 °C ... +70 °C Mounted mechanic: MRA-G130-105D3 Wire acceleration: 4 m/s² Maximum load current: 30 mA Enclosure rating mechanic: IP 50 Hysteresis: ≤ 0.4 mm Mass (including encoder): 1.1 kg Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Mass (measuring wire): 1.2 g/m Repeatability: ≤ 0.2 mm MTTFd: mean time to dangerous failure: 300 a Measuring range: 0 m ... 5 m Part number encoder: 1037565