PFG08-E1AM0371

Specification: Part Number 1060981 Working temperature range (mechanics): -30 °C ... +70 °C Reference signal, number: 1, electronically, gated with A and B Maximum output frequency: 600 kHz Mass (including encoder): 550 g Life of wire draw mechanism: 1 million cycles Supply voltage: 4.5 V ... 32 V Linearity: ≤ ± 2 mm Mounted mechanic: MRA-G080-103D3 Enclosure rating encoder: IP 67 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Mass (measuring wire): 1.2 g/m Housing material, wire draw mechanism: Plastic, Noryl Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A EMC: (according to EN 61000-6-2 and EN 61000-6-3) Electrical interface: HTL/Push pull Pulses per revolution: 16,384 Spring return force: 5 N ... 6.3 N Reference signal, position: Electronically, gated with A and B Measuring range: 0 m ... 3 m Operating speed: 4 m/s Power consumption: 0.7 W Wire acceleration: 10 m/s² Repeatability: ≤ 0.2 mm Part number encoder: 1037615 Actual length of cable extension: 3.2 m Part number mechanic: 5322778 MTTFd: mean time to dangerous failure: 300 a Encoder: Incremental encoders Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Connection type: Connector M23, 12-pin, radial Maximum load current: 30 mA Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Resolution (wire draw + encoder): 0.014 mm Working temperature range (encoder): -30 °C ... +70 °C Mass (mechanics): 250 g Hysteresis: ≤ 0.4 mm Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Mounted encoder: DFS60 Measuring wire diameter: 0.55 mm Enclosure rating mechanic: IP 50 Length of wire pulled out per revolution: 230 mm