PFG08-A1CM0371

Specification: Part Number 1060974 Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Length of wire pulled out per revolution: 230 mm Working temperature range (mechanics): -30 °C ... +70 °C Measuring wire diameter: 0.55 mm Mass (mechanics): 250 g Resolution (wire draw + encoder): 0.014 mm Linearity: ≤ ± 2 mm Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Actual length of cable extension: 3.2 m Enclosure rating encoder: IP 67 Power consumption: 0.7 W Wire acceleration: 10 m/s² Spring return force: 5 N ... 6.3 N Part number mechanic: 5322778 Reference signal, number: 1, electronically, gated with A and B Hysteresis: ≤ 0.4 mm Connection type: Male connector M12, 8-pin, radial Life of wire draw mechanism: 1 million cycles Mass (including encoder): 550 g Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Encoder: Incremental encoders EMC: (according to EN 61000-6-2 and EN 61000-6-3) Mounted mechanic: MRA-G080-103D3 Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Housing material, wire draw mechanism: Plastic, Noryl MTTFd: mean time to dangerous failure: 300 a Reference signal, position: Electronically, gated with A and B Working temperature range (encoder): -30 °C ... +70 °C Maximum output frequency: 600 kHz Pulses per revolution: 16,384 Electrical interface: 4.5 V ... 5.5 V, TTL/RS422 Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Part number encoder: 1037566 Enclosure rating mechanic: IP 50 Operating speed: 4 m/s Mounted encoder: DFS60 Mass (measuring wire): 1.2 g/m Supply voltage: 4.5 V ... 32 V Maximum load current: 30 mA Measuring range: 0 m ... 3 m Repeatability: ≤ 0.2 mm