PFG08-E1CM0371

Specification: Part Number 1060979 Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Wire acceleration: 10 m/s² Power consumption: 0.7 W Part number encoder: 1037616 Linearity: ≤ ± 2 mm Mounted mechanic: MRA-G080-103D3 Reference signal, number: 1, electronically, gated with A and B Repeatability: ≤ 0.2 mm Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Connection type: Male connector M12, 8-pin, radial Hysteresis: ≤ 0.4 mm Operating speed: 4 m/s Enclosure rating encoder: IP 67 Mounted encoder: DFS60 Working temperature range (mechanics): -30 °C ... +70 °C Mass (measuring wire): 1.2 g/m Pulses per revolution: 16,384 Electrical interface: HTL/Push pull Actual length of cable extension: 3.2 m Mass (mechanics): 250 g Length of wire pulled out per revolution: 230 mm Housing material, wire draw mechanism: Plastic, Noryl Maximum output frequency: 600 kHz Part number mechanic: 5322778 Measuring wire diameter: 0.55 mm Supply voltage: 4.5 V ... 32 V Encoder: Incremental encoders Measuring range: 0 m ... 3 m Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Resolution (wire draw + encoder): 0.014 mm MTTFd: mean time to dangerous failure: 300 a Reference signal, position: Electronically, gated with A and B Enclosure rating mechanic: IP 50 Working temperature range (encoder): -30 °C ... +70 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Maximum load current: 30 mA Mass (including encoder): 550 g Life of wire draw mechanism: 1 million cycles Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Spring return force: 5 N ... 6.3 N Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms