PFG19-A1AM1029

Specification: Part Number 1061021 Enclosure rating mechanic: IP 50 Maximum load current: 30 mA Mass (mechanics): 1.9 kg Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Mass (including encoder): 2.2 kg Repeatability: ≤ 0.2 mm Length of wire pulled out per revolution: 555 mm Linearity: ≤ ± 2 mm Mounted encoder: DFS60 Power consumption: 0.7 W Encoder: Incremental encoders Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Pulses per revolution: 16,384 Actual length of cable extension: 10.2 m Measuring range: 0 m ... 10 m Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Working temperature range (mechanics): -30 °C ... +70 °C Resolution (wire draw + encoder): 0.034 mm Operating speed: 4 m/s Mounted mechanic: MRA-G190-110D3 Housing material, wire draw mechanism: Plastic, Noryl MTTFd: mean time to dangerous failure: 300 a Spring return force: 9 N ... 12 N Mass (measuring wire): 1.2 g/m Wire acceleration: 8 m/s² Reference signal, position: Electronically, gated with A and B Maximum output frequency: 600 kHz Measuring wire diameter: 0.55 mm Part number encoder: 1037565 Connection type: Connector M23, 12-pin, radial Supply voltage: 4.5 V ... 32 V Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Enclosure rating encoder: IP 67 Electrical interface: 4.5 V ... 5.5 V, TTL/RS422 Hysteresis: ≤ 0.4 mm Working temperature range (encoder): -30 °C ... +70 °C Life of wire draw mechanism: 1 million cycles Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Part number mechanic: 5326242 Reference signal, number: 1, electronically, gated with A and B EMC: (according to EN 61000-6-2 and EN 61000-6-3) Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A