PFG13-E1AM0544

Specification: Part Number 1061018 Part number mechanic: 5322779 Enclosure rating mechanic: IP 50 Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Measuring range: 0 m ... 5 m Spring return force: 4.5 N ... 7 N Wire acceleration: 4 m/s² Mass (including encoder): 1.1 kg Mounted mechanic: MRA-G130-105D3 Linearity: ≤ ± 2 mm Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Electrical interface: HTL/Push pull Pulses per revolution: 16,384 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik MTTFd: mean time to dangerous failure: 300 a Operating speed: 4 m/s Reference signal, position: Electronically, gated with A and B Mounted encoder: DFS60 Part number encoder: 1037615 Mass (measuring wire): 1.2 g/m Reference signal, number: 1, electronically, gated with A and B Working temperature range (mechanics): -30 °C ... +70 °C Actual length of cable extension: 5.2 m Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Length of wire pulled out per revolution: 385 mm Working temperature range (encoder): -30 °C ... +70 °C Enclosure rating encoder: IP 67 Repeatability: ≤ 0.2 mm Life of wire draw mechanism: 1 million cycles Housing material, wire draw mechanism: Plastic, Noryl Maximum load current: 30 mA Power consumption: 0.7 W Hysteresis: ≤ 0.4 mm Supply voltage: 4.5 V ... 32 V Measuring wire diameter: 0.55 mm Connection type: Connector M23, 12-pin, radial Resolution (wire draw + encoder): 0.023 mm Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Mass (mechanics): 800 g Encoder: Incremental encoders Maximum output frequency: 600 kHz