PFG13-E1CM0544

Specification: Part Number 1061017 Reference signal, number: 1, electronically, gated with A and B Maximum output frequency: 600 kHz Enclosure rating mechanic: IP 50 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Measuring wire diameter: 0.55 mm Supply voltage: 4.5 V ... 32 V Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Part number encoder: 1037616 EMC: (according to EN 61000-6-2 and EN 61000-6-3) MTTFd: mean time to dangerous failure: 300 a Mass (including encoder): 1.1 kg Pulses per revolution: 16,384 Resolution (wire draw + encoder): 0.023 mm Housing material, wire draw mechanism: Plastic, Noryl Actual length of cable extension: 5.2 m Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Mounted encoder: DFS60 Electrical interface: HTL/Push pull Mass (measuring wire): 1.2 g/m Repeatability: ≤ 0.2 mm Linearity: ≤ ± 2 mm Enclosure rating encoder: IP 67 Measuring range: 0 m ... 5 m Mass (mechanics): 800 g Power consumption: 0.7 W Hysteresis: ≤ 0.4 mm Spring return force: 4.5 N ... 7 N Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Part number mechanic: 5322779 Length of wire pulled out per revolution: 385 mm Connection type: Male connector M12, 8-pin, radial Reference signal, position: Electronically, gated with A and B Maximum load current: 30 mA Working temperature range (encoder): -30 °C ... +70 °C Life of wire draw mechanism: 1 million cycles Encoder: Incremental encoders Wire acceleration: 4 m/s² Working temperature range (mechanics): -30 °C ... +70 °C Operating speed: 4 m/s Mounted mechanic: MRA-G130-105D3