PFG08-A1AM0371

Specification: Part Number 1060977 Reference signal, position: Electronically, gated with A and B Part number mechanic: 5322778 Pulses per revolution: 16,384 Enclosure rating encoder: IP 67 Resolution (wire draw + encoder): 0.014 mm MTTFd: mean time to dangerous failure: 300 a Working temperature range (mechanics): -30 °C ... +70 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Part number encoder: 1037565 Mounted mechanic: MRA-G080-103D3 Life of wire draw mechanism: 1 million cycles Enclosure rating mechanic: IP 50 Reference signal, number: 1, electronically, gated with A and B Mounted encoder: DFS60 Maximum output frequency: 600 kHz Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Repeatability: ≤ 0.2 mm Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Working temperature range (encoder): -30 °C ... +70 °C Power consumption: 0.7 W Mass (mechanics): 250 g Connection type: Connector M23, 12-pin, radial Electrical interface: 4.5 V ... 5.5 V, TTL/RS422 Operating speed: 4 m/s Wire acceleration: 10 m/s² Mass (measuring wire): 1.2 g/m Mass (including encoder): 550 g Measuring range: 0 m ... 3 m Encoder: Incremental encoders Spring return force: 5 N ... 6.3 N Length of wire pulled out per revolution: 230 mm Actual length of cable extension: 3.2 m Housing material, wire draw mechanism: Plastic, Noryl Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Maximum load current: 30 mA Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Linearity: ≤ ± 2 mm Measuring wire diameter: 0.55 mm Supply voltage: 4.5 V ... 32 V Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Hysteresis: ≤ 0.4 mm Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted)