PFG13-A1CM0544

Specification: Part Number 1061015 Electrical interface: 4.5 V ... 5.5 V, TTL/RS422 Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) Mounted encoder: DFS60 Measuring wire diameter: 0.55 mm Measuring range: 0 m ... 5 m Life of wire draw mechanism: 1 million cycles Resolution (wire draw + encoder): 0.023 mm Enclosure rating encoder: IP 67 Mass (including encoder): 1.1 kg Repeatability: ≤ 0.2 mm Supply voltage: 4.5 V ... 32 V Power consumption: 0.7 W Encoder: Incremental encoders Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Enclosure rating mechanic: IP 50 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Actual length of cable extension: 5.2 m Mass (measuring wire): 1.2 g/m Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Part number mechanic: 5322779 Working temperature range (encoder): -30 °C ... +70 °C Part number encoder: 1037566 Wire acceleration: 4 m/s² Hysteresis: ≤ 0.4 mm Maximum load current: 30 mA Pulses per revolution: 16,384 Working temperature range (mechanics): -30 °C ... +70 °C Mounted mechanic: MRA-G130-105D3 Housing material, wire draw mechanism: Plastic, Noryl Linearity: ≤ ± 2 mm EMC: (according to EN 61000-6-2 and EN 61000-6-3) MTTFd: mean time to dangerous failure: 300 a Initialization time: ≤ 32 ms, with mechanical zero pulse width≤ 30 ms Connection type: Male connector M12, 8-pin, radial Length of wire pulled out per revolution: 385 mm Operating speed: 4 m/s Maximum output frequency: 600 kHz Spring return force: 4.5 N ... 7 N Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Mass (mechanics): 800 g Reference signal, position: Electronically, gated with A and B Reference signal, number: 1, electronically, gated with A and B