Specification: Part Number 6041738 Ripple: ≤ 5 Vpp Puls width: ≤ 1 s Housing material: PSU Medium: Fluids Accuracy of sensor element: 2 % (of final value) Output current: < 100 mA Process pressure: Max. 10 bar Signal voltage HIGH: Vs - 2 V Minimim flow: 3.5 l/min Capacitive load: 100 nF Supply voltage: 18 V DC ... 30 V DC Initialization time: ≤ 5 s Process temperature: 0 °C .
Specification: Part Number 6043745 Weight: 420 g Impuls/frequency output: 0 kHz ... 10 kHz Output load: < 500 Ohm Upper signal level: 20 mA ... 20.5 mA Supply voltage: 18 V DC ... 30 V DC Lower signal level: 3.8 mA ... 4 mA Nominal width measuring tube: NW 20 Process temperature: 0 °C ... +80 °C Protection class: III Resolution: 0.012 l/min Puls width: ≤ 1 s Inductive load: 1 H Capac
Specification: Part Number 6044523 Minimim flow: 5 l/min Nominal width measuring tube: NW 25 Accuracy of sensor element: 2 % (of final value) Output load: < 500 Ohm Medium: Fluids Initialization time: ≤ 5 s Puls width: ≤ 1 s Process temperature: 0 °C ... +80 °C Enclosure rating: IP 67 Wetted parts: PSU Ambient storage temperature: -20 °C ... +70 °C Conductivity: No limitation Sig
Specification: Part Number 6041739 Ambient temperature operation: 0 °C ... +60 °C Maximum flow: 240 l/min Accuracy of sensor element: 2 % (of final value) Capacitive load: 100 nF Nominal width measuring tube: NW 25 Process connection: G 1 ¼ Inductive load: 1 H Ripple: ≤ 5 Vpp Initialization time: ≤ 5 s Wetted parts: PSU Resolution: 0.03 l/min Process temperature: 0 °C ... +80 °C
Specification: Part Number 6043746 Maximum flow: 240 l/min Impuls/frequency output: 0 kHz ... 10 kHz Upper signal level: 20 mA ... 20.5 mA Process temperature: 0 °C ... +80 °C Nominal width measuring tube: NW 25 Lower signal level: 3.8 mA ... 4 mA Medium: Fluids Wetted parts: PSU Process pressure: Max. 10 bar Enclosure rating: IP 67 Signal voltage LOW: ≤ 2 V Inlet zone: 60 cm Inductiv
Specification: Part Number 6044996 Upper signal level: 20 mA ... 20.5 mA Inlet zone: 60 cm Process pressure: Max. 10 bar Process connection: 1 ¼" NPT Impuls/frequency output: 0 kHz ... 10 kHz Power consumption: ≤ 180 mA Process temperature: 0 °C ... +80 °C Housing material: PSU Ripple: ≤ 5 Vpp Weight: 460 g Wetted parts: PSU Medium: Fluids Initialization time: ≤ 5 s Minimi
Specification: Part Number 6049566 Outlet zone: 10 cm Nominal width measuring tube: NW 25 Resolution: 0.03 l/min Ambient temperature operation: 0 °C ... +60 °C Puls width: ≤ 1 s Inductive load: 1 H Output load: < 500 Ohm Process connection: 1 ¼" NPT Lower signal level: 3.8 mA ... 4 mA Process pressure: Max. 10 bar Upper signal level: 20 mA ... 20.5 mA Signal voltage LOW: ≤ 2 V Init
Specification: Part Number 1061713 Usage: Flaxi Loop master node to connect a Flexi Loop cascade to Flexi Classic. System diagnostics during operation and during commisioning without busmaster. IO-Link: -
Specification: Part Number 1067650 Usage: Flaxi Loop master node to connect a Flexi Loop cascade to Flexi Classic. System diagnostics during operation and during commisioning without busmaster. IO-Link: +
Specification: Part Number 1061715 IO-Link: - Usage: The power supply module is used to connect a power supply with 24 V DC, for the electrical isolation and for overcurrent shutdown.
Specification: Part Number 2074733 Usage: The Flexi Loop Y-adapter (EMMS) splits the 8-pin connection of the FLN-EMSS1100108 in two 5-pin connections: One for dual-channel equivalent electro-mechanical safety switches and one for non-safe I/O signals. IO-Link: -
Specification: Part Number 2074734 Usage: The Flexi Loop Y-adapter (OSSD) splits the 8-pin connection of the FLN-OSSD1100108 in two 5-pin connections: One for safety sensors with dual-channel OSSD outputs and one for non-safe I/O signals. IO-Link: -
Specification: Part Number 6049334 Vibration resistance: (EN 60068-2-6) Protection class: III Housing material: Aluminum, painted Switching frequency: ≤ 5,000 Hz Output current Imax.: 100 mA Supply voltage Vs : DC 18 V ... 30 V Version: Close Dimensions (W x H x D): 182 mm x 230 mm x 25 mm Task : Switching light grid EMC: EN 60947-5-2 Detection area (W x H) : 120 mm x 200 mm Indication: LED
Specification: Part Number 6050066 Response time: < 0.1 ms Shock load: EN 60068-2-27 Switching frequency: ≤ 5,000 Hz Technology: Sender/receiver Output function: Light/dark switching adjustable by means of rotary switch Version: Open Wave length: 880 nm Minimum detectable object (MDO) : Dynamic: 2 mm Statiic: 6 mm Connection type: Connector M12, 4-pin Protection class: III EMC: EN 60947-5-2
Specification: Part Number 6049135 Dimensions (W x H x D): 182 mm x 230 mm x 25 mm Output function: Light/dark switching adjustable by means of rotary switch Vibration resistance: (EN 60068-2-6) Version: Close Ripple: < 10 % Wave length: 880 nm Connection type: Connector M12, 4-pin Task : Switching light grid Ambient temperature : Operation: 0 ... +60 °C Storage: -20 ... +80 °C Enclosure rating: IP
Specification: Part Number 6050067 Circuit protection: Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected Detection area (W x H): 120 mm x 200 mm Ripple: < 10 % Ambient light safety: Sunlight: 10,000 lx Enclosure rating: IP 65 Supply voltage Vs : DC 18 V ... 30 V Housing material: Aluminum, painted Switching frequency: ≤ 5,000 Hz Beam separation: 4 mm
Specification: Part Number 6049136 Ambient light safety: Sunlight: 10,000 lx Connection type: Connector M12, 4-pin Task : Switching light grid Wave length: 880 nm Protection class: III Version: Close Weight: 1 kg Shock load: EN 60068-2-27 Dimensions (W x H x D): 242 mm x 230 mm x 25 mm Initialization time: 0.3 s Output current Imax.: 100 mA Ripple: < 10 % Output function: Light/dark switch
Specification: Part Number 6049137 Enclosure rating: IP 65 EMC: EN 60947-5-2 Beam separation: 4 mm Supply voltage Vs : DC 18 V ... 30 V Ambient temperature : Operation: 0 ... +60 °C Storage: -20 ... +80 °C Connection type: Connector M12, 4-pin Output current Imax.: 100 mA Output function: Light/dark switching adjustable by means of rotary switch Ripple: < 10 % Weight: 0.86 kg Detection area (W x
Specification: Part Number 6050069 Beam separation: 4 mm Technology: Sender/receiver Weight: 0.86 kg Task : Switching light grid Output function: Light/dark switching adjustable by means of rotary switch EMC: EN 60947-5-2 Dimensions (W x H x D): 312 mm x 230 mm x 25 mm Minimum detectable object (MDO): Dynamic: 4 mm Statiic: 6 mm Switching frequency: ≤ 5,000 Hz Housing material: Aluminum, painted
Specification: Part Number 1061711 TM (mission time): 20 a (EN ISO 13849) Power supply output for external devices: - Performance level: PL e (EN ISO 13849-1) Connection type Flexi Loop output: Female connector M12, 5-pin Enclosure rating: IP 65, IP 67 (EN 60529) Safety device connection: Dual-channel equivalent electro-mechanical safety switch (EMSS) Type of supply voltage: SELV Shock resistance (single shock)
Specification: Part Number 1061712 Power consumption: 55 mA Type of supply voltage: SELV PFHd: 0.76 1E-09 (EN ISO 13849) Safety device connection: Dual-channel equivalent electro-mechanical safety switch (EMSS) Short-circuit: Monitoring via Flexi Loop node Electromagnetic compatibility (EMC): Class A (EN 61000-6-2, EN 55011) Discrepancy errors: Monitoring via Flexi Loop node Shock resistance (single shock): 3
Specification: Part Number 1061709 Power consumption: 45 mA Electromagnetic compatibility (EMC): Class A (EN 61000-6-2, EN 55011) Connection type safety device: Female connector M12, 5-pin Storage temperature: -25 °C ... +70 °C Flexi Loop output: To connect a Flexi Loop successor module, or to terminate a Flexi Loop string with the Flexi Loop termination element. Performance level: PL e (EN ISO 13849-1) IO-Link:
Specification: Part Number 1061710 Flexi Loop output: To connect a Flexi Loop successor module, or to terminate a Flexi Loop string with the Flexi Loop termination element. Enclosure rating: IP 65, IP 67 (EN 60529) Cross-circuit: Monitoring via OSSD device IO-Link: - Connection type safety device: Female connector M12, 8-pin Flexi Loop input: To connect a Flexi Loop predecessor module, or to connect a Flexi Loop strin
Specification: Part Number 1044076 Enclosure rating terminals: IP 20 (EN 60529) Fieldbus, industrial network: CANopen Internal power consumption: ≤ 1.6 W Climate conditions according to: EN 61131-2 (55 °C ambient operating temperature, 95% rel. humidity) Voltage supply: Via FLEXBUS+ Protection class housing: IP 40 (EN 60529) Weight: 150 g (± 10 %) Ambient operating temperature: -25 °C ... +55 °C Sto
Specification: Part Number 1044072 Fieldbus, industrial network: EtherNet/IP Protection class housing: IP 40 (EN 60529) Storage temperature: -25 °C ... +70 °C Integrated Ethernet switch: 3-port layer-2 managed switch with Auto-MDI-X for automatic detection of crossed Ethernet cable Ambient operating temperature: -25 °C ... +55 °C Internal power consumption: ≤ 2.4 W Connection type: 2 x female connector, RJ
Specification: Part Number 1051432 Type of fieldbus integration: Integrated device Weight: 150 g (± 10 %) Voltage supply: Via FLEXBUS+ Data transmission rate: ≥10 Mbit/s (10Base-T) ≥100 Mbit/s (100Base-TX) (autosensing) Protection class housing: IP 40 (EN 60529) Protection class: III (EN 61140) Climate conditions according to: EN 61131-2 (55 °C ambient operating temperature, 95% rel. humidity) Vibration
Specification: Part Number 1044073 Weight: 125 g (± 10 %) Storage temperature: -25 °C ... +70 °C Electromagnetic compatibility (EMC): Class A (EN 61000-6-2, EN 55011) Vibration resistance: 5 g, 10 Hz ... 500 Hz (EN 60068-2-6) Integrated Ethernet switch: 3-port layer-2 managed switch with Auto-MDI-X for automatic detection of crossed Ethernet cable Type of fieldbus integration: Integrated device Internal power co
