LFP3000-G1CMB

Specification: Part Number 1072031 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V Accuracy of sensor element: ± 5 mm Temperature drift: < 0.1 mm/K Signal voltage LOW: &le; 2 V RoHS certificate: + Inactive area at probe end: 10 mm GOST approval: + Interference emission: EN 61000-6-4:2007 Single- and continuous shock: EN 60068-2-27 Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono probe Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Process connection: G ¾ A Supply voltage: 12 V DC ... 30 V DC IO-Link: + Wetted parts: 316L (Ra &le; 0,8 µm), PEEK Signal voltage HIGH: Vs - 2 V Housing material: 303 MTTF: 194.3 a (EN ISO 13849-1) Repeatability: &le; 2 mm 3-A: - Output current: < 100 mA Conductivity: No limitation Hysteresis: Min. 2 mm, free adjustable Upper signal level: 20 mA ... 20.5 mA Housing design: With PMMA viewing window Resolution: < 2 mm Capacitive load: 100 nF Response time: < 400 ms Connection type: Round connector M12 x 1, 5-pin EMC: EN 61326-1:2006, 2004/108/EG Process pressure: -1 bar ... 16 bar Interference resistance: EN 61000-6-2:2005 Lower signal level: 3.8 mA ... 4 mA Ambient temperature operation: -20 °C ... +60 °C Power consumption: &le; 75 mA at 24 V DC without output load Initialization time: &le; 2 s Length coaxial cable: 2 m, FEP Ambient temperature coaxial cable: -20 °C ... +60 °C Probe length: 3,000 mm Measurement: Switch, Continuous Inductive load: < 1 H Max.probe load: 6 Nm Medium: Fluids Protection class: III EHEDG approval: + Inactive area at process connector: 25 mm Process temperature: -20 °C ... +180 °C Ambient storage temperature: -40 °C ... +80 °C UL approval: +