LFP1800-B4NMB

Specification: Part Number 1057108 Temperature drift: < 0.1 mm/K Inactive area at process connector: 25 mm Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Capacitive load: 100 nF Wetted parts: 1.4404, PTFE Medium: Fluids Resolution: < 2 mm Inactive area at probe end: 10 mm Hysteresis: Min. 2 mm, free adjustable EMC: EN 61326-1:2006, 2004/108/EG Probe type: Mono rod probe Protection class: III Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Design: Standard Accuracy of sensor element: ± 5 mm Process pressure: -1 bar ... 10 bar GOST approval: + Ambient temperature operation: -20 °C ... +60 °C Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Conductivity: No limitation Probe length: 1,800 mm Process connection: ¾" NPT Repeatability: &le; 2 mm Power consumption: &le; 100 mA at 24 V DC without output load Signal voltage LOW: &le; 2 V Process temperature: -20 °C ... +100 °C Response time: < 400 ms Inductive load: < 1 H Upper signal level: 20 mA ... 20.5 mA IO-Link: + Lower signal level: 3.8 mA ... 4 mA Output current: < 100 mA MTTF: 194.3 a (EN ISO 13849-1) Ambient storage temperature: -40 °C ... +80 °C Supply voltage: 12 V DC ... 30 V DC Housing material: Plastic PBT Maximum level change: 500 mm/s Initialization time: &le; 5 s Signal voltage HIGH: Vs - 2 V RoHS certificate: + Enclosure rating: IP 67: EN 60529 Measurement: Switch, Continuous Connection type: Round connector M12 x 1, 5-pin CULus certificate: + Max.probe load: 6 Nm