GM400

Connection Connector M23, 12-pin Cable 1 m Relative humidity 95 % non-condensing Interference immunity DIN EN 61000-6-2 Code Gray or binary Starting acceleration ≤1000 U/s² Voltage supply 10...30 VDC 5 VDC ±10 % Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Code sequence CW/CCW coded by connection Diagnostic functions Self-diagnosis Multiturn sensing Sensing method Optical Incremental output 2048 pulses A90°B + inverted Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Initializing time typ. 20 ms after power on Number of turns ≤65536 / 16 bit Function Multiturn Reverse polarity protection Yes (10..30 VDC) / No (5 VDC) Rotor moment of inertia 20 gcm² Admitted shaft load ≤20 N axial ≤40 N radial Absolute accuracy ±0.025 ° Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Shaft type ø10 mm solid shaft Operating temperature -25...+85 °C -40...+85 °C (optional) manufacter SKU GM400 Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Steps per turn ≤16384 / 14 bit Interfaces SSI Incremental A 90° B (optional) Emitted interference DIN EN 61000-6-4 Output stages SSI data: linedriver RS485 Diagnostic outputs push-pull Size (flange) ø58 mm Consumption w/o load ≤50 mA (24 VDC) ≤80 mA (5 VDC) Inputs SSI clock Control signals UP/ DOWN and zero Flange Clamping flange Weight approx. 400 g Approval UL approval / E63076 Materials Housing: steel Flange: aluminium