GI352

Shaft type ø9.52 mm solid shaft Pulses per revolution 5...6000 Interference immunity DIN EN 61000-6-2 Voltage supply 5 VDC ±10 % 4.75...30 VDC Size (flange) 63.5 x 63.5 mm Sensing method Optical manufacter SKU GI352 Flange Clamping flange square 63.5 x 63.5 mm Admitted shaft load ≤20 N axial ≤40 N radial Consumption w/o load ≤30 mA (24 VDC) ≤60 mA (5 VDC) Materials Housing: aluminium Flange: aluminium Rotor moment of inertia 14.5 gcm² Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Reverse polarity protection Yes (4.75...30 VDC) Approval UL approval / E63076 Weight approx. 280 g Reference signal Zero pulse, width 90° GI352 output signals A 90° B, N + inverted Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Operating speed ≤10000 rpm Connection MIL-connector, 7-pin MIL-connector, 10-pin Operating temperature -25...+100 °C (5 VDC) -25...+85 °C (24 VDC) Relative humidity 95 % non-condensing Output stages Linedriver/RS422 Push-pull short-circuit proof Output frequency ≤150 kHz Emitted interference DIN EN 61000-6-4 Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal)