GBM2W

Flange Clamping or synchro flange Initializing time typ. 20 ms after power on Weight approx. 400 g Inputs SSI clock: RS422 Control signals UP/ DOWN and zero Function Multiturn Absolute accuracy ±0.01 ° Voltage supply 10...30 VDC Interference immunity DIN EN 61000-6-2 Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Incremental output 2048 pulses A90°B + inverted Code sequence CW/CCW coded by connection Connection Connector M23, 12-pin Cable 1 m Number of turns 4096 / 12 bit Diagnostic functions Self-diagnosis Multiturn sensing Steps per turn 262144 / 18 bit Relative humidity 95 % non-condensing Sensing method Optical Emitted interference DIN EN 61000-6-4 Code Gray or binary Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Output stages SSI data: RS422 Diagnostic outputs push-pull Admitted shaft load ≤20 N axial ≤40 N radial Rotor moment of inertia 20 gcm² Consumption w/o load ≤50 mA (24 VDC) Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Operating temperature -25...+85 °C -40...+85 °C (optional) manufacter SKU GBM2W Materials Housing: steel Flange: aluminium Starting acceleration ≤1000 U/s² Approval UL approval / E63076 Reverse polarity protection Yes Size (flange) ø58 mm Interfaces SSI Incremental A 90° B (optional)