BDH

Admitted shaft load ≤40 N axial ≤60 N radial BDH output signals A 90° B, N + inverted Operating torque typ. 0.022 Nm (IP 42) 0.026 Nm (IP 65) Flange Clamping flange Operating speed ≤12000 rpm (IP 42) ≤6000 rpm (IP 65) Resistance DIN EN 60068-2-6 Vibration 10 g, 10-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms Voltage supply 5 VDC ±10 % 10...30 VDC 4.5...30 VDC Consumption typ. 80 mA (5 VDC, w/o load) 60 mA (24 VDC, w/o load) 180 mA (4.5 VDC, w/o load) Weight approx. 300 g Approval UL approval / E217823 Shaft type ø10 mm solid shaft (clamping flange) Reference signal Zero pulse, width 90° Interference immunity DIN EN 61000-6-2 Output stages Antivalent Push-pull short-circuit proof Push-pull antiv. short-circuit proof manufacter SKU BDH Output frequency ≤200 kHz (24K) ≤300 kHz (05A/25W) Relative humidity 95 % non-condensing Connection Connector M23, 12-pin Cable 2 m Materials Housing: steel Housing: aluminium (connection A) Flange: aluminium Size (flange) ø55 mm Sensing method Optical Pulses per revolution 10...5000 Protection DIN EN 60529 IP 42 IP 65 Emitted interference DIN EN 61000-6-3 Operating temperature -20...+85 °C