ATD2AH00

Starting torque ≤0.01 Nm (+20 °C) Function Singleturn Load resistor ≥1 k&;8486; (recommended 10 k&;8486;) / voltage output ≤500 &;8486; (recommended 470 &;8486;) / current output Measuring range 90°, 180°, 360° Motor shaft tolerance 0.25 mm axial 0.1 mm radial Code sequence CW: ascending values with clockwise sense of rotation; looking at mounting surface Size (flange) ø58 mm Interface analog IS (current output, 4...20 mA) IE (current output, 0...20 mA) US (voltage output, 0...10 VDC) UE (voltage output, -10...+10 VDC) UT (voltage output, 0...5 VDC) UR (voltage output, -5...5 VDC) Voltage supply +UB= 12...30 VDC (IS-/IE-/US-/UT-version) -UB= -12...-26 VDC / +UB 12...30 VDC (UE-/UR-version) Weight approx. 150 g Emitted interference DIN EN 61000-6-3 Sensing method Optical Resistance DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 30 g, 11 ms Connection Board connector, 8-pin Reverse polarity protection Yes Consumption w/o load ≤50 mA (24 VDC) Relative humidity 90 % non-condensing Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) Materials Housing: aluminium Shaft: stainless steel Interference immunity DIN EN 61000-6-2 Output stages Voltage output (short-circuit proof) Current output (short-circuit proof) Protection DIN EN 60529 IP 65 Resolution 14 bit Shaft type ø10 mm (through hollow shaft) ø12 mm (through hollow shaft) ø14 mm (through hollow shaft) Operating temperature -20...+85 °C manufacter SKU ATD2AH00 Updating values ≤130 µs