OpenAirâ„¢ GBB Series Electric Damper Actuator, rotary, non-spring return, 221 lb-in (25 Nm), 24 Vac/dc, floating control, 125 sec run time, position feedback
Fail-In-Place, 53 lb-in, 2-sec., 24Vac/dc, universal control signal (two-position, floating, 0-10Vdc/2-10Vdc, 4-20mA/0-20mA, Siemens proprietary FHC/LRC pulsed), shaft diameter is 1/4 to 3/4 in. round or 1/4 to 1/2 in square, switches
Fail-In-Place, 53 lb-in, 2-sec., 24Vac/dc, universal control signal (two-position, floating, 0-10Vdc/2-10Vdc, 4-20mA/0-20mA, Siemens proprietary FHC/LRC pulsed), shaft diameter is 1/4 to 3/4 in. round or 1/4 to 1/2 in square
The Electronic Fusible Link (EFL) is a heat responsive deivce used with the Siemens OpenAir UL listed fire and smoke control damper actuator. Upon exceeding the 350F (177C) temperature limits of the EFL model ordered and installed, the EFL cuts power to the electronic damper actutor and the actuator's spring retrun mechanism closes the damper. The EFL is compatible only with OpenAir GNDxxx.xU/F UL listed fire and smoke damper actuators.The EFL mu
The Electronic Fusible Link (EFL) is a heat responsive deivce used with the Siemens OpenAir UL listed fire and smoke control damper actuator. Upon exceeding the 250F (121C) temperature limits of the EFL model ordered and installed, the EFL cuts power to the electronic damper actutor and the actuator's spring retrun mechanism closes the damper. The EFL is compatible only with OpenAir GNDxxx.xU/F UL listed fire and smoke damper actuators.The EFL mu
The Electronic Fusible Link (EFL) is a heat responsive deivce used with the Siemens OpenAir UL listed fire and smoke control damper actuator. Upon exceeding the 212F temperature limits of the EFL model ordered and installed, the EFL cuts power to the electronic damper actutor and the actuator's spring retrun mechanism closes the damper. The EFL is compatible only with OpenAir GNDxxx.xU/F UL listed fire and smoke damper actuators.The EFL must be
The Electronic Fusible Link (EFL) is a heat responsive deivce used with the Siemens OpenAir UL listed fire and smoke control damper actuator. Upon exceeding the 165F (74C) temperature limits of the EFL model ordered and installed, the EFL cuts power to the electronic damper actutor and the actuator's spring retrun mechanism closes the damper. The EFL is compatible only with OpenAir GNDxxx.xU/F UL listed fire and smoke damper actuators.The EFL mus
This Weathershield Kit is for OpenAir GEB and GMA Series Electronic Damper Actuators. Includes cover, base place with factory-installed gasketing, 15 TEK self-drilling screws, and anti-rotation (mounting) bracket. Knockouts for connection of 1/2" conduit also included.
This Weathershield Kit is for OpenAir GCA, GBB and GIB Series Electric Damper Actuators. Includes cover, base place with factory-installed gasketing, 15 TEK self-drilling screws, and anti-rotation (mounting) bracket. Knockouts for connection of 1/2" conduit also included.
This Special Shaft Adapter accepts up to 1-1/20" diameter shafts and can be used for coupling to 1.05" jackshafts that are slightly oversized. This adapter is for use with OpenAir GCA, GBB and GIB damper actuators. When the adapter is used with a GIB damper actuator, it accepts shaft diameters from 3/4 to 1-1/20".
This Universal Crank Arm is used for linear applications requiring connection to damper shaft when ball joint connection is not possible. Fits shaft sizes 3/8 to 1".
This Crank Arm Kit with Bracket is for use in applications where the actuator can be rigidly surface-mounted and a linear stroke output is required. This kit can be used with OpenAirâ„¢GCA, GBB, GIB and GKB damper actuators.
This Crank Arm Kit allows a direct-coupled actuator to provide an auxiliary linear drive. This kit can be used to simultaneously drive a set of opposing or adjacent dampers with a single actuator. This kit can be used with OpenAirâ„¢ GCA, GBB and GIB damper actuators.
This Frame Mount Kit is for direct mounting to damper frame. The kit includes a crank arm to generate a linear stroke, a Teflon support-bearing ring to minimize side-loading on the actuator's output bearing and other mounting fasteners. This kit is for use with OpenAir GCA, GBB, GIB and GKB damper actuators.
This Floor Mount Kit is for air stream applications and where a foot-mounted actuator can be used. This kit is a replacement for a Honeywell MOD motor and includes a crank arm, Teflon support-bearing ring and mounting fasteners. This kit is for use with OpenAir GCA, GBB, GIB, and GKB damper actuators.
This Crank Arm Kit with Bracket is for use in applications where the actuator can be rigidly surface-mounted and a linear stroke output is required. This kit can be used with OpenAirâ„¢ GEB and GMA actuators.
This Crank Arm Kit allows a direct-coupled actuator to provide an auxiliary linear drive. This kit can be used to simultaneously drive a set of opposing or adjacent dampers with a single actuator. This kit can be used with OpenAirâ„¢ GEB and GMA damper actuators.
This Combined Foot/Frame Mount Kit is for direct mounting to the damper frame. Includes a crank arm to generate a linear stroke, Teflon support-bearing ring to minimize side-loading on the actuator's output bearing, and other mounting fasteners. This kit is for GEB and GMA OpenAirâ„¢ actuators.
The OpenAir External Auxiliary Switch (EAS) provides switch functionality for standard model damper actuators with easy installation for in-service units.
