This Membrane Element Kit is for Product Group 186. It replaces the membrane element and contains one element assembly, screws, nuts, and lock washers.
This duct mounted 186 Pneumatic Hygrostat is reverse acting and includes temperature compensation, a sensitive hygroscopic membrane, room comfort control and a control range of 25% to 65% relative humidity. Cover and wall plate are included.
This duct mounted 186 Pneumatic Hygrostat is reverse acting with high limit temperature detection and includes temperature compensation, a sensitive hygroscopic membrane and a control range of 55% to 95% relative humidity. Cover and wall plate are included.
This 186 Duct Humidity Transmitter is an one-pipe, direct acting pneumatic instruments that sense space humidity and transmit a 3 to 15 psi pneumatic signal to a remote receiver gauge and/or receiver-controller to read percent relative humidity. This transmitter has a 20 to 80 percent relative humidity, an outlet pressure of 3 to 15 psi, and is to be mounted vertically at least 6" high and 6.5" deep. The transmitter should be used in the return a
This duct mounted 186 Pneumatic Hygrostat is reverse acting and includes temperature compensation, a sensitive hygroscopic membrane and a control range of 20% to 90% relative humidity. Cover and wall plate are included.
This duct mounted 186 Pneumatic Hygrostat is direct acting and includes temperature compensation, a sensitive hygroscopic membrane and a control range of 20% to 90% relative humidity. Cover and wall plate are included.
This 186 Room Humidity Transmitter is an one-pipe, direct acting pneumatic instruments that sense space humidity and transmit a 3 to 15 psi pneumatic signal to a remote receiver gauge and/or receiver-controller to read percent relative humidity. This transmitter has a 20 to 80 percent relative humidity, an outlet pressure of 3 to 15 psi, and is wall terminal mounted. This transmitter has a cover and the air velocity must be at least 30 FPM and th
This wall mounted 186 Pneumatic Hygrostat is reverse acting and includes temperature compensation, a sensitive hygroscopic membrane and a control range of 20% to 90% relative humidity. Cover and wall plate included.
This wall mounted 186 Pneumatic Hygrostat is direct acting and includes temperature compensation, a sensitive hygroscopic membrane and a control range of 20% to 90% relative humidity. Cover and wall plate included.
This Type 2 Barbed Restrictor Tee has an orifice diameter of 0.0074", a nominal air capacity of 40 scim and a 100 percent maximum flow capacity at 22 psi. This green plastic restrictor has a barbed connection for 1/4" plastic tubing, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity molded on its body and comes in a package of five.
This Type 2 Barbed Restrictor Tee has an orifice diameter of 0.0051", a nominal air capacity of 20 scim and a 100 percent maximum flow capacity at 22 psi. This yellow plastic restrictor has a barbed connection for 1/4" plastic tubing, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity molded on its body and comes in a package of five.
This Type 2 Barbed Restrictor Tee has an orifice diameter of 0.0035", a nominal air capacity of 10 scim and a 100 percent maximum flow capacity at 22 psi. This red plastic restrictor has a barbed connection for 1/4" plastic tubing, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity molded on its body and comes in a package of five.
This Type 3 Barbed Restrictor Tee has an orifice diameter of 0.0074", a nominal air capacity of 40 scim and a 100 percent maximum flow capacity at 22 psi. This green plastic restrictor has a barbed connection for 1/4" plastic tubing, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity molded on its body and comes in a package of five.
This Type 3 Barbed Restrictor Tee has an orifice diameter of 0.0051", a nominal air capacity of 20 scim and a 100 percent maximum flow capacity at 22 psi. This yellow plastic restrictor has a barbed connection for 1/4" plastic tubing, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity molded on its body and comes in a package of five.
This Type 3 Barbed Restrictor Tee has an orifice diameter of 0.0035", a nominal air capacity of 10 scim and a 100 percent maximum flow capacity at 22 psi. This red plastic restrictor has a barbed connection for 1/4" plastic tubing, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity molded on its body and comes in a package of five.
This Type 1 In-line Threaded External Restrictor has an orifice diameter of 0.00201", a nominal air capacity of 320 scim and a 100 percent maximum flow capacity at 22 psi. This brass restrictor has a 1/8" NPT thread air connection, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity stamped its body.
This Type 1 In-line Threaded External Restrictor has an orifice diameter of 0.0098", a nominal air capacity of 80 scim and a 100 percent maximum flow capacity at 22 psi. This brass restrictor has a 1/8" NPT thread air connection, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity stamped its body.
This Type 1 In-line Threaded External Restrictor has an orifice diameter of 0.0074", a nominal air capacity of 40 scim and a 100 percent maximum flow capacity at 22 psi. This brass restrictor has a 1/8" NPT thread air connection, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity stamped its body.
This Type 1 In-line Threaded External Restrictor has an orifice diameter of 0.0051", a nominal air capacity of 20 scim and a 100 percent maximum flow capacity at 22 psi. This brass restrictor has a 1/8" NPT thread air connection, an air filter, and an air flow direction arrow to minimize installation errors. This restrictor features air flow capacity stamped its body.
This 184 Room Temperature Transmitter is a direct-acting, one-pipe instrument that senses temperature and transmits a proportional 3 to 15 psi pneumatic signal to a remotely-located receiver gauge and/or receiver controller. This transmitter has a temperature range of 50 to 100 degrees Fahrenheit, a bimetal thermal system and is wall terminal mounted. This transmitter also has a cover and wall plate.
This Retroline Remote Bulb Temperature Transmitter has a temperature range of -40 to 60 degrees Fahrenheit, a 1/4" x 7 5/8" bulb with 50" capillary and replaces Johnson Controls T5210-1113.
This Retroline Remote Bulb Temperature Transmitter has a temperature range of 40 to 240 degrees Fahrenheit, a 1/4" x 7 5/8" bulb with a 8" capillary and replaces Johnson Controls part number T5210-1004.
This 184 Remote Averaging Bulb Temperature Transmitter is a direct-acting, one-pipe instrument that senses temperature and transmits a proportional 3 to 15 psi pneumatic signal to a remotely-located receiver gauge and/or receiver controller. This transmitter has a temperature range of 0 to 100 degrees Fahrenheit, a liquid-filled thermal system and has either a mounting flange or well bracket mounting kit. The bulb measures 3/32-inch diameter, is
This 184 Remote Bulb Temperature Transmitter is a direct-acting, one-pipe instrument that senses temperature and transmits a proportional 3 to 15 psi pneumatic signal to a remotely-located receiver gauge and/or receiver controller. This transmitter has a temperature range of 30 to 190 degrees Fahrenheit, a liquid-filled thermal system and has either a mounting flange or well bracket mounting kit. The bulb measures 1/4-inch diameter, is 4 inches l
This 184 Remote Bulb Temperature Transmitter is a direct-acting, one-pipe instrument that senses temperature and transmits a proportional 3 to 15 psi pneumatic signal to a remotely-located receiver gauge and/or receiver controller. This transmitter has a temperature range of 0 to 100 degrees Fahrenheit, a liquid-filled thermal system and has either a mounting flange or well bracket mounting kit. The bulb measures 1/4-inch diameter, is 4 inches lo
This 184 Remote Bulb Temperature Transmitter is a direct-acting, one-pipe instrument that senses temperature and transmits a proportional 3 to 15 psi pneumatic signal to a remotely-located receiver gauge and/or receiver controller. This transmitter has a temperature range of 35 to 135 degrees Fahrenheit, a liquid-filled thermal system and has either a mounting flange or well bracket mounting kit. The bulb measures 1/4-inch diameter, is 4 inches l
This 184 Rigid Bulb Temperature Transmitter is a direct-acting, one-pipe instrument that senses temperature and transmits a proportional 3 to 15 psi pneumatic signal to a remotely-located receiver gauge and/or receiver controller. This transmitter has a temperature range of 0 to 100 degrees Fahrenheit, a rod and tube thermal system and a mounting flange. The bulb measures 1/4-inch diameter and is 9 ft long.
