SIEMENS - Overvoltage Protection

Image
Part Number
Description
SURGE ARRESTER TYPE2, PLUG-IN PROTECTION MODULES, UC 800V AC,1-POLE, A VARISTOR AND A GAS-FILLED SPARK GAP IN SERIES, REMOTE SIGNALING CONTACT
SURGE ARRESTER TYPE 2 CAT. C, UOC STC 1000V DC PROTECTION BLOCKS PLUGGABLE FOR PHOTOVOLTAICS
SURGE ARRESTER TYPE 2 CAT. C, UOC STC 1000V DC PROTECTION BLOCKS PLUGGABLE FOR PHOTOVOLTAICS COMMUNICATION CONTACT
SURGE ARRESTER TYPE2, PLUG-IN PROTECTION MODULES, UC 750V AC,3-POLE, FOR 4-CONDUCTOR POWER SUPPLY SYSTEMS (L1,L2,L3,PEN), REMOTE SIGNALING CONTACT
SPD T1/T2,UC1050V DC, IMAX 40KA,IMMUNITY TO SHORT-CIRCUITING 80A, 2+V CIRCUIT, FOR INSULATED AND GROUNDED PV SYSTEMS
SURGE ARRESTER TYPE 2 REQUIREMENT CAT. C,UC 440V AC PROTECTION BLOCKS PLUGGABLE 4POLES, 4+0 CIRCUIT FOR IT SYSTEMS WITH N CONDUCTOR
SURGE ARRESTER TYPE 2 REQUIREMENT CAT. C,UC 440V AC PROTECTION BLOCKS PLUGGABLE 4POLES, 4+0 CIRCUIT FOR IT SYSTEMS WITH N CONDUCTOR COMMUNICATION CONTACT
MALE CONNECTOR TYPE 2 N-PE REQUIREMENT CATEGORY C, UC 260V 1POLE F. SURGE ARRESTER 5SD746..., 5SD747..., 5SD7481-0
MALE PIECE TYPE 2 L-N UC 440V, IMAX 40KA, TYPE 2, CLASS II, REQUIREMENT CATE. C, 1POLES, USABLE WITH ALL SURGE ARRESTER 5SD74 WIDTH 18MM
PROTECTION PLUG TYPE2 UC 750V AC, FOR 5SD7481-1 AND 5SD7483-5,
PROTECTION PLUG FOR 5SD7481-1
BUSBAR 3POLES FOR MOUNTING 3X 1POLE SURGE ARRESTERS TYPE 2, CLASS II, REQUIREMENT CAT. C, WIDTH 18MM, 1PHASE
MOUNTING SET FOR THREE LIGHTNING ARRESTERS 5SD74112
MALE PIECE TYPE 2 L-N UC 580V, IMAX 30KA, TYPE 2, CLASS II, REQUIREMENT CAT. C, 1POLES, USABLE WITH ALL SURGE ARRESTER 5SD74 WIDTH 18MM
BASE ELEMENT 2 WIRE ROUGH PROT. FOR DIN RAIL MOUNTING FOR ROUGH PROTECTION OF 2 SIGNAL WIRES MOUNTING FOOT DIRECT EARTHED FOR PLUGGING MODULE 5SD7502-0
PLUGGING MODULE 2 WIRE, ROUGH FOR ROUGH PROTECTION OF 2 SIGNAL WIRES UC=68V DC/48V AC
BASE ELEMENT,INTEGRATED GAS ARRESTER BETWEEN GND AND PE, FOR PLUGS 5SD7512-.
BASE ELEMENT 1X2, DIN RAIL 1 CHANNEL, 2 WIRES MONTING FOOT DIRECTLY EARTHED FOR PLUGGING MODULE 5SD7520-1 AND 5SD7530-3
PLUGGING MODULE TELECOM ROUGH AND FINE SURGE PROTECTION FOR ANALOG TELECOMMUNICATION LINES UC=185V DC / 130V AC
BASE ELEMENT 2X2, DIN RAIL 2 CHANNELS, 4 WIRES MOUNTING FOOT INDIRECT EARTHED VIA A GAS_FILLED SURGE ARRESTER FOR PLUGGING MODULE 5SD7522-. AND 5SD7550-4
PROTECTION CONNECTOR FOR TWO FLOATING SIGNAL WIRES AND GROUND IN IT,12V DC, FOR BASE ELEMENT 5SD7512-1
BASE ELEMENT FOR PLUGS 5SD7540-.
PROTECTION CONNECTOR FOR A 4-CORE FLOATING SIGNAL CIRCUIT, 24V DC, FOR BASE ELEMENTS 5SD7540-0 AND 5SD7540-1
SURGE PROTECTION FOR ANALOG AND DIGITAL TELECOMMUNICATIONS INTERFACES, CONNECTION: RJ45(RJ12/RJ11)
SURGE PROTECTION FOR ETHERNET INTERFACES UP TO 10GBITS, INCLUDED POE
D-SUB-9 ATTACHEMENT PLUG WITH SURGE PROTECTION FOR RS-485 INTERFACES
D-SUB-9 ATTACHEMENT PLUG WITH SURGE PROTECTION FOR V.24 INTERFACE
Menu
Mail Us
enquiry@onstocktrading.com