Specification: Part Number 6039514 Seal: Without seal Ambient temperature: -20 °C ... 80 °C Protection class III: + Pressure type: Gauge pressure Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Connection type: L-connector DIN EN 175301-803 A, IP 65 CE-conformity: + Housing material: Stainless steel Response time:
Specification: Part Number 6038719 Process temperature: -30 °C ... 100 °C Enclosure rating: IP 67 Connection type: M12x1, 4-pin Process connection: G 1/4 A (DIN 3852-E) Pressure port: Standard Vibration load: 20 g according to IEC 60068-2-6 (vibration under resonance) Ambient temperature: -20 °C ... 80 °C Protection class III: + Supply voltage: 10 V DC ... 30 V DC Rated temperature: 0 °C ... 80 °
Specification: Part Number 6038721 Measuring range: 0 bar ... 0.1 bar Supply voltage: 14 V DC ... 30 V DC Non-linearity: ± 0.2 % (Best Fit Straight Line (BFSL)) Connection type: M12x1, 4-pin Protection class III: + Output signal: 0...10 V, 3-wire Response time:
Specification: Part Number 6038722 Process connection: G 1/4 (female) Non-linearity: ± 0.2 % (Best Fit Straight Line (BFSL)) Enclosure rating: IP 67 Process temperature: -30 °C ... 100 °C Protection class III: + Measuring range: 0 bar ... 0.1 bar Vibration load: 20 g according to IEC 60068-2-6 (vibration under resonance) Supply voltage: 14 V DC ... 30 V DC Ambient temperature: -20 °C ... 80 °C
Specification: Part Number 6039867 Output signal: 4...20 mA Protection class III: + Measuring range: 0 bar ... 0.25 bar Enclosure rating: IP 65 Process connection: G 1/4 A (DIN 3852-E) CE-conformity: + Accuracy:
Specification: Part Number 6039510 Process temperature: -30 °C ... 100 °C Vibration load: 20 g according to IEC 60068-2-6 (vibration under resonance) Accuracy:
Specification: Part Number 6039296 Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Supply voltage: 10 V DC ... 30 V DC Enclosure rating: IP 67 Measuring range: 0 bar ... 10 bar Weight sensor: ± 500 g Process temperature: -20 °C ... 150 °C Non-linearity: 0.2 % (Best Fit Straight Line (BFSL)) Wetted parts: Stainless steel 1.4435
Specification: Part Number 6039428 Process temperature: -20 °C ... 150 °C Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Response time:
Specification: Part Number 6039316 Enclosure rating: IP 67 Output signal: 4...20 mA Connection type: M12 x 1, 4-pin Measuring range: 0 bar ... 6 bar CE-conformity: + Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Pressure type: Gauge pressure Process connection: Female union nut DIN 11851 DN 40 Housing material: Stainless steel
Specification: Part Number 6039407 Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Rated temperature: 0 °C ... 80 °C Vibration load: 15g per IEC 60068-2-6 (vibration under resonance) CE-conformity: + Output signal: 4...20 mA Accuracy:
Specification: Part Number 6039295 Ambient temperature: -20 °C ... 80 °C Housing material: Stainless steel 1.4571 Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Response time:
Specification: Part Number 6041197 Output signal: 4...20 mA Protection class III: + Vibration load: 15g per IEC 60068-2-6 (vibration under resonance) Enclosure rating: IP 65 Seal: EPDM Weight sensor: ± 500 g Housing material: Stainless steel 1.4571 Measuring range: 0 bar ... 0.4 bar CE-conformity: + Ambient temperature: -20 °C ... 80 °C Shock load: 500 g according to IEC 60068-2-27 (mechanica
Specification: Part Number 1028953 Indication: LED Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) EMC: EN 60947-5-2 Output load inductive: 1 H Working range (PL150): 1.3 m Wave length: 650 nm Minimum detectable object (MDO): Parallel beam, 35 mm Maximum range (reflective tape REF-PLG): 1.5 m Dimensions (W x H x D): 35.6 mm x 199 mm x 19 mm Job LED input: PNP Ripple: < 5 Vpp Weight: 20
Specification: Part Number 1028548 Dimensions (W x H x D): 35.6 mm x 279 mm x 19 mm Ambient temperature: Operation: -10 ... +55 °C Storage: -40 ... +70 °C Housing material: Aluminum Current consumption job LED : 10 mA Switching output: 1 x PNP (Q) Circuit protection: Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected Output mode : Q dark switching Enclosure rat
Specification: Part Number 1029130 Minimum detectable object (MDO): Parallel beam, 35 mm Maximum range (PL150): 2 m Working range (PL150): 1.3 m Wave length: 650 nm Beam separation: 30 mm Minimum range: ≥100 mm Working range (reflective tape REF-PLG): 1 m Output mode : Q dark switching Dimensions (W x H x D): 35.6 mm x 349 mm x 19 mm Shock load: 10 g / DIN EN 60068-2-29 / 16 ms EMC: EN 60947-5-2
Specification: Part Number 1029131 Task: Switching light grid Indication: LED Shock load: 10 g / DIN EN 60068-2-29 / 16 ms Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Current consumption job LED : 10 mA EMC: EN 60947-5-2 Power consumption sender: < 45 mA Beam separation: 30 mm Minimum detectable object (MDO): Parallel beam, 35 mm Weight: 450 g Front screen: PMMA Ambient temperature:
Specification: Part Number 1029132 Connection type: Short cable (0.28 m) with connector M12, 4-pin Front screen: PMMA Detection height: 420 mm Initialization time: 0.6 s Output mode : Q dark switching Technology: Retro-reflective light grid Beam separation: 30 mm Task: Switching light grid Shock load: 10 g / DIN EN 60068-2-29 / 16 ms Ripple: < 5 Vpp Switching output: 1 x PNP (Q) Vibration resis
Specification: Part Number 1051978 Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Job LED input: PNP Beam separation: 60 mm Enclosure rating: IP 40 Power consumption sender: 50 mA Response time : Parallel beam: ≥5 ms Ripple: < 5 Vpp Current consumption job LED : 30 mA Weight: < 500 g Output current Imax.: 50 mA Protection class: III Supply voltage Vs : DC 15 V ... 30 V Initiali
Specification: Part Number 1043453 Mirror width: 125 mm Number of mirrors: 1 Column height: 1,285 mm Suitable for protective field height: 150 mm ... 900 mm Suitable for number of beams: Any Model: Mirror columns with protective field height mirror Suitable for beam separation: Any Suitable for: Multiple light beam safety devices Safety light curtains Mirror length: 900 mm Type of diversion: Horizontal
Specification: Part Number 1043454 Model: Mirror columns with protective field height mirror Type of diversion: Horizontal Suitable for protective field height: 150 mm ... 1,350 mm Mirror width: 125 mm Suitable for beam separation: Any Suitable for number of beams: Any Number of mirrors: 1 Mirror length: 1,350 mm Suitable for: Multiple light beam safety devices Safety light curtains Column height: 1,72
Specification: Part Number 1043455 Suitable for protective field height: 150 mm ... 1,650 mm Mirror length: 1,650 mm Suitable for beam separation: Any Type of diversion: Horizontal Model: Mirror columns with protective field height mirror Suitable for number of beams: Any Mirror width: 125 mm Column height: 2,000 mm Number of mirrors: 1 Suitable for: Multiple light beam safety devices Safety light curt
Specification: Part Number 1043456 Type of diversion: Horizontal Suitable for number of beams: Any Mirror width: 125 mm Model: Mirror columns with protective field height mirror Column height: 2,200 mm Suitable for protective field height: 150 mm ... 1,800 mm Suitable for: Multiple light beam safety devices Safety light curtains Mirror length: 1,800 mm Number of mirrors: 1 Suitable for beam separation:
Specification: Part Number 1040625 Model: Mirror columns with up to 4 separate adjustable mirrors Suitable for beam separation: 400 mm Mirror width: 100 mm Suitable for: Multiple light beam safety devices Suitable for number of beams: 3 Type of diversion: Horizontal Height of first beam above ground: 300 mm Mirror length: 90 mm Column height: 1,185 mm Number of mirrors: 3
Specification: Part Number 1040624 Column height: 1,285 mm Suitable for number of beams: 3 Number of mirrors: 3 Suitable for beam separation: 450 mm Suitable for: Multiple light beam safety devices Mirror width: 100 mm Mirror length: 90 mm Height of first beam above ground: 300 mm Model: Mirror columns with up to 4 separate adjustable mirrors Type of diversion: Horizontal
Specification: Part Number 1040626 Type of diversion: Horizontal Number of mirrors: 4 Suitable for number of beams: 4 Height of first beam above ground: 300 mm Mirror width: 100 mm Mirror length: 90 mm Model: Mirror columns with up to 4 separate adjustable mirrors Suitable for: Multiple light beam safety devices Column height: 1,285 mm Suitable for beam separation: 300 mm
Specification: Part Number 1040620 Height of first beam above ground: 400 mm Mirror width: 100 mm Mirror length: 90 mm Number of mirrors: 2 Type of diversion: Horizontal Suitable for number of beams: 2 Column height: 985 mm Suitable for beam separation: 600 mm Model: Mirror columns with up to 4 separate adjustable mirrors Suitable for: Multiple light beam safety devices
