Specification: Part Number 1040069 Housing: Standard Items supplied: Fastening nuts (2 x) Power-up pulse protection: + Sensing range Sn: 60 mm Connection type: Cable, 3-wire, 2 m Magnetic sensitivity: 1 mT Design: Cylindrical Reverse polarity protection: + Housing length: 44 mm Switching output: PNP Ambient operating temperature: -25 °C ... 75 °C Magnetic alignment: Axial Time delay befo
Specification: Part Number 1051013 Magnetic alignment: Axial Time delay before availability: ≤ 2 ms Switching output: NPN Housing length: 50 mm Housing: Advanced Thread size: M12 x 1 Sensing range Sn: 90 mm Power consumption: ≤ 10 mA Temperature drift (of Sr): ± 10 % Wire-break protection: 0 Enclosure rating: IP 67 Repeatability: ≤ 1 % Switching frequency: 5,000 Hz Items su
Specification: Part Number 1029950 Tightening torque, max.: 7 Nm Output current Ia: ≤ 300 mA Switching frequency: 5,000 Hz Sensing range Sn: 90 mm Connection type: Connector M12, 4-pin Ambient operating temperature: -25 °C ... 75 °C Thread size: M12 x 1 Electrical wiring: DC 3-wire Hysteresis: 1 % ... 10 % Power consumption: ≤ 10 mA Supply voltage: 10 V DC ... 30 V DC Time delay before
Specification: Part Number 1029951 Power consumption: ≤ 10 mA Housing: Advanced Housing length: 50 mm Output current Ia: ≤ 300 mA Ripple: ≤ 10 % Switching output: PNP Magnetic sensitivity: 0.6 mT Items supplied: Fastening nuts (2 x) Supply voltage: 10 V DC ... 30 V DC Cable material: PUR/PVC Voltage drop: ≤ 1.5 V Time delay before availability: ≤ 2 ms Sensing range Sn: 90
Specification: Part Number 1026614 Reverse polarity protection: + Current consumption, sensor is activated: ≥ 2.5 mA Internal inductance Li max.: 35 µH Wire-break protection: 1 Tightening torque, max.: ≤ 25 Nm Cable resistance: ≤ 50 &;937; Output characteristic: Control courrent depending on switching state according to NAMUR EN 60947-5-6 Connection type: Connector M12, 4-pin Magnetic sensitivit
Specification: Part Number 7900289 Ripple: ≤ 5 % Temperature drift (of Sr): ± 10 % EMC: According to EN 60947-5-2 Short-circuit protection: + Sensing range Sn: 70 mm Time delay before availability: ≤ 2 ms Internal inductance Li max.: 35 µH Current consumption, sensor is activated: ≥ 2.5 mA EC Approval Certificate: TÜV 99 ATEX 1398 Switching frequency: 5,000 Hz Repeatability: ≤ 1
Specification: Part Number 7900288 Magnetic sensitivity: 0.7 mT Short-circuit protection: + Cable material: PVC Electrical wiring: NAMUR Assured sensing range Sa: 56.7 mm Shock/vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm ATEX marking: EX II 2G Ex ia IIC T6 Ta: -20 °C ... 70 °C Housing length: 50 mm Wire-break protection: 1 Reverse polarity protection: + Switching frequency: 5,000 Hz Connection
Specification: Part Number 1050765 Housing material: Stainless steel, V4A Ambient operating temperature: -25 °C ... 75 °C Reverse polarity protection: + Supply voltage: 10 V DC ... 30 V DC Special feature: Short version Assured sensing range Sa: 56.7 mm Shock/vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm Tightening torque, max.: 40 Nm Power-up pulse protection: + Ripple: ≤ 10 % Hysteresis: 1 %
Specification: Part Number 1040072 Magnetic sensitivity: 0.7 mT Ambient operating temperature: -25 °C ... 75 °C Housing length: 50 mm Thread size: M18 x 1 Output function: NO Switching output: PNP Reverse polarity protection: + Housing material: Metal, Nickel-plated brass Supply voltage: 10 V DC ... 30 V DC Magnetic alignment: Axial Enclosure rating: IP 67 Tightening torque, max.: 40 Nm T
Specification: Part Number 1040029 Ambient operating temperature: -25 °C ... 75 °C Power consumption: ≤ 10 mA Ripple: ≤ 10 % Voltage drop: ≤ 2 V Housing: Standard Repeatability: ≤ 1 % Switching frequency: 1,000 Hz Shock/vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm Magnetic sensitivity: 0.7 mT Switching output: PNP Output function: NO Sensing range Sn: 70 mm Supply voltage:
Specification: Part Number 6034245 Ripple: ≤ 10 % Selectable speed limit: 0.1 Hz ... 9.9 Hz Number of safety inputs: 4 (I1 - I4) Safe speed monitoring (SSM): + Performance level: PL e (EN ISO 13849-1) Number of application diagnostic outputs: 2 (X1, X2) Enclosure rating terminals: IP 20 (EN 60529) TM (mission time): 20 a (EN ISO 13849) Number of safe outputs: 4 (Q1 - Q4) Air humidity: 10 % ... 95 %
Specification: Part Number 6034246 Stop category: 0 (EN 60204) Type of output application diagnostic output: PNP semiconductor, short-circuit protected Number of safety inputs: 4 (I1 - I4) Selectable speed limit: 0.1 Hz ... 9.9 Hz Performance level: PL e (EN ISO 13849-1) Protection class: III (EN 61140) Dimensions (W x H x D): 22.5 mm x 106.5 mm x 121 mm Type of parameterization: Screwdriver Number of appli
Specification: Part Number 6034247 Safe limited speed (SLS): + Number of safety inputs: 4 (I1 - I4) Connection type: Screw-type terminals Number of safe outputs: 4 (Q1 - Q4) Output voltage: 18.4 V DC ... 30 V DC Power consumption: ≤ 3 W Performance level: PL e (EN ISO 13849-1) Ambient operating temperature: -25 °C ... +55 °C Climate conditions according to: EN 61131-2 Type of parameterization: Scr
Specification: Part Number 6044982 PFHd: 41 1E-09 (EN ISO 13849) Contact configuration (safety contacts): 3 contacts NO, 1 contact NC Maximum switching frequency: 1,200 /h Voltage threshold Uan: 20 mV ... 400 mV, adjustable Measurement inputs: L1/L2/L3 Response time: 100 ms Stop category: 1 (EN 60204-1) Mounting: 35 mm mounting rail according to EN 60715 Dimensions (W x H x D): 45 mm x 112 mm x 121 mm
Specification: Part Number 6044983 Contact type: Relay, positively guided Mounting: 35 mm mounting rail according to EN 60715 Mechanical life: ≥ 50 1E 06 switching operations Weight: 400 g Power consumption: 10 VA Contact configuration (safety contacts): 3 contacts NO, 1 contact NC Performance level: PL e (EN ISO 13849-1) Measurement inputs: L1/L2/L3 PFHd: 41 1E-09 (EN ISO 13849) Protection class h
Specification: Part Number 6044981 Nominal switching voltage: 250 V AC For UL 508 applications only: 600 V AC Standstill time ts: 0.2 s ... 6 s, adjustable Climate conditions according to: 25/060/04 (EN 60068-1) Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) Safety outputs: Normally open contact (13/14, 23/24, 33/34) Mounting: 35 mm mounting rail according to EN 60715 Contact service life at 230 V /
Specification: Part Number 6047866 For UL 508 applications only: 600 V AC Mounting: 35 mm mounting rail according to EN 60715 Enclosure rating terminals: IP 20 Weight: 400 g Stop category: 1 (EN 60204-1) Response time: 100 ms Measurement inputs: L1/L2/L3 Contact service life at 230 V / 5 A (AC) cos φ = 0.5: ≥ 2 1E 05 switching operations Mechanical life: ≥ 50 1E 06 switching operations Signal c
Specification: Part Number 1059479 Housing length: 1,009 mm Analog output (current): 4 mA ... 20 mA IO-Link: + Connection type: Cable with connector M8, 4-pin, 0.3 m Protection class: III Cable material: PUR Reverse polarity protection: + Linearity typ.: 0.5 mm Load resistance, max.: 500 &;937; Enclosure rating: IP 65 IP 67 IP 68 Min. load resistance: 2 k&;937; Housing cap material: PA, str
Specification: Part Number 1059442 Resolution typ.: 0.03 % FSR (max. >= 0.06 mm) Connection type: Cable with connector M8, 4-pin, 0.3 m Measuring range: 107 mm Conductor cross-section: 0.14 mm² Analog output (voltage): 0 V ... 10 V EMC: According to EN 60947-5-2 IO-Link: + Protection class: III IO-Link functions: Standard functions Magnetic field sensitivity, typ.: 2 mT Shock/vibration: 30 g,
Specification: Part Number 1059443 Ambient operating temperature: -20 °C ... +70 °C Repeat accuracy typ: 0.06 % FSR (>= 0.1 mm) IO-Link functions: Standard functions Analog output (voltage): 0 V ... 10 V Shock/vibration: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm Housing cap material: PA, strengthened Output indicator: + Min. load resistance: 2 k&;937; Conductor cross-section: 0.14 mm² EMC: According to EN
Specification: Part Number 1059444 Housing length: 145 mm Supply voltage: 15 V DC ... 30 V DC Min. load resistance: 2 k&;937; Teach-in: 1 Reverse polarity protection: + Protection class: III IO-Link: + Magnetic field sensitivity, typ.: 2 mT Sampling rate typ.: 1.15 ms Measuring range: 143 mm Connection type: Cable with connector M8, 4-pin, 0.3 m Analog output (current): 4 mA ... 20 mA Sho
Specification: Part Number 1059448 Ambient operating temperature: -20 °C ... +70 °C Short-circuit protection: + Shock/vibration: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm Min. load resistance: 2 k&;937; Reverse polarity protection: + Teach-in: 1 Cylinder types with adapter: Roundbody cylinder T-slot Tie rod cylinder Supply voltage: 15 V DC ... 30 V DC Analog output (voltage): 0 V ... 10 V Magnetic field sens
