LFP3000-E4NMB

Specification: Part Number 1066787 Housing material: Plastic PBT Probe type: Rope probe Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Inactive area at process connector: 25 mm Wetted parts: 1.4404, PTFE Protection class: III Medium: Fluids Signal voltage LOW: &le; 2 V Process connection: G ¾ A Inductive load: < 1 H Initialization time: &le; 5 s Resolution: < 2 mm Signal voltage HIGH: Vs - 2 V GOST approval: + Upper signal level: 20 mA ... 20.5 mA Probe length: 3,000 mm Ambient temperature operation: -20 °C ... +60 °C Output current: < 100 mA Repeatability: &le; 2 mm Connection type: Round connector M12 x 1, 5-pin Process temperature: -20 °C ... +100 °C Conductivity: No limitation IO-Link: + Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Response time: < 400 ms Design: Standard Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Maximum level change: 500 mm/s RoHS certificate: + Temperature drift: < 0.1 mm/K Enclosure rating: IP 67: EN 60529 Power consumption: &le; 100 mA at 24 V DC without output load Measurement: Switch, Continuous Process pressure: -1 bar ... 10 bar EMC: EN 61326-1:2006, 2004/108/EG Ambient storage temperature: -40 °C ... +80 °C Inactive area at probe end: 10 mm Accuracy of sensor element: ± 5 mm Capacitive load: 100 nF Supply voltage: 12 V DC ... 30 V DC Max.probe load: 6 Nm MTTF: 194.3 a (EN ISO 13849-1) CULus certificate: + Hysteresis: Min. 2 mm, free adjustable Lower signal level: 3.8 mA ... 4 mA