FFUC25-1C1SR

Specification: Part Number 6050188 Process connection: Clamp (DIN 11864-3) Response time: Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s Outlet zone: 10 cm Supply voltage: 18 V DC ... 30 V DC Inductive load: 1 H Nominal width measuring tube: NW 25 Capacitive load: 100 nF Repeatability: &le; 0.5 % Process pressure: Max. 10 bar Medium: Fluids Protection class: III Signal voltage HIGH: Vs - 2 V Inlet zone: 60 cm Ambient storage temperature: -20 °C ... +70 °C Maximum flow: 240 l/min Upper signal level: 20 mA ... 20.5 mA Resolution: 0.03 l/min Output signal: Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature 2 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring 1 digital input for dosing and counter reset Puls width: &le; 1 s Minimim flow: 5 l/min Power consumption: &le; 180 mA Weight: 460 g Ripple: &le; 5 Vpp Accuracy of sensor element: 1 % (of reading +/- 3 mm/s (with calibration report)) Conductivity: No limitation Ambient temperature operation: 0 °C ... +60 °C Connection type: Round connector M12 x 1, 8-pin Output load: < 500 Ohm Wetted parts: PSU Impuls/frequency output: 0 kHz ... 10 kHz Enclosure rating: IP 67 Lower signal level: 3.8 mA ... 4 mA Initialization time: &le; 5 s Process temperature: 0 °C ... +80 °C Output current: < 100 mA Signal voltage LOW: &le; 2 V Housing material: PSU