FFUC15-1C1SR

Specification: Part Number 6050189 Resolution: 0.006 l/min Output load: < 500 Ohm Wetted parts: PSU Signal voltage HIGH: Vs - 2 V Conductivity: No limitation Accuracy of sensor element: 1 % (of reading +/- 3 mm/s (with calibration report)) Ripple: &le; 5 Vpp Upper signal level: 20 mA ... 20.5 mA Weight: 350 g Inductive load: 1 H Minimim flow: 0.9 l/min Ambient temperature operation: 0 °C ... +60 °C Ambient storage temperature: -20 °C ... +70 °C Process temperature: 0 °C ... +80 °C Impuls/frequency output: 0 kHz ... 10 kHz Output signal: Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature 2 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring 1 digital input for dosing and counter reset Supply voltage: 18 V DC ... 30 V DC Response time: Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s Puls width: &le; 1 s Inlet zone: 30 cm Outlet zone: 5 cm Medium: Fluids Capacitive load: 100 nF Protection class: III Housing material: PSU Power consumption: &le; 180 mA Enclosure rating: IP 67 Output current: < 100 mA Maximum flow: 36 l/min Repeatability: &le; 0.5 % Initialization time: &le; 5 s Process connection: Clamp (DIN 11864-3) Signal voltage LOW: &le; 2 V Lower signal level: 3.8 mA ... 4 mA Nominal width measuring tube: NW 15 Connection type: Round connector M12 x 1, 8-pin Process pressure: Max. 16 bar