Specification: Part Number 6048601 Weight sensor: Ca. 80 g CE-conformity: Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 Ambient temperature: 0 °C ... +80 °C Compound pressure: -1 bar ... 0 bar up to -1 bar ... +24 bar Non-repeatability: ≤ 0.1 % of span Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional Power consumption: Max. 8 mA for
Specification: Part Number 6039173 Seal: Without seal Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Internal transmission fluid: Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ≤ 0 bar abs ... 25 bar abs) Ambient temperature: 0 °C ... +80 °C Isolation voltage: 500 V DC Protection class
Specification: Part Number 6038634 Wetted parts: Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) Connection type: Round connector M12 x 1, 4-pin, IP 67 Ambient temperature: 0 °C ... +80 °C Process connection: G ¼ female Enclosure rating: IP 67 Shock load: 500 g according to IEC 60068-2-27 (mechanical shock)
Specification: Part Number 6042030 Adjustment accuracy of zero signal: ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) Enclosure rating: IP 67 Pressure port: 0.3 mm pressure port Response time: < 4 ms Seal: NBR Gauge pressure: 0 bar ... 1 bar up to bar ... 600 bar Process connection: G ¼ A according to DIN 3852-E Reference conditions: Reference conditions: According to IEC 61298
Specification: Part Number 6041766 Gauge pressure: 0 bar ... 1 bar up to bar ... 600 bar Pressure port: Standard Response time: < 4 ms Storage temperature: -20 °C ... +80 °C Accuracy: ≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), ≤ ± 1 % of span (with non-linearity 0.25 %), ≤ ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and f
Specification: Part Number 6038662 Response time: < 4 ms Internal transmission fluid: Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ≤ 0 bar abs ... 25 bar abs) Adjustment accuracy of zero signal: ≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %) Absolute pressure: 0 bar ... 1 bar up to 0 bar ... 25 bar Service life: Minimum 100 Mio. life cycles Accuracy: ≤ ± 0,6 % o
Specification: Part Number 6038663 Output signal: 0...10 V, 3-wire Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Protection class III: + Non-linearity: ≤ ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) Storage temperature: -20 °C ... +80 °C Rated temperature range: 0 °C ... +80 °C Electrical safety: Short-circuit protection: QA towards M, Protection class: III, Overvolt
Specification: Part Number 6039268 Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Measuring range: 0 psi ... 50 psi Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional Connection type: Round connector M12 x 1, 4-pin, IP 67 Electrical safety: Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, R
Specification: Part Number 6039260 Compound pressure: -1 bar ... 0 bar up to -1 bar ... +24 bar Electrical safety: Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M Rated temperature range: 0 °C ... +80 °C Process connection: ¼'' NPT Vibration load: 10 g according to IEC 60068-2-6 (vibration under resona
Specification: Part Number 6038816 Housing material: Stainless steel Wetted parts: With flush-mounted diaphragm: Stainless steel O-ring: NBR (O-ring made of FPM/FKM for version with flush-mounted membrane with integrated cooling element), FPM/FKM optional Pressure port: Front-flush membrane Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Shock l
Specification: Part Number 6044138 Enclosure rating: IP 67 Response time (10 % ... 90 %): ≤ 1 ms (≤ 10 ms at medium temperatures below < -30°C for pressure ranges up to 25 bar or with flush-mounted membrane) Housing material: Stainless steel Process temperature: -30 °C ... 100 °C Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Pres
Specification: Part Number 6038774 Protection class III: + Seal: Without seal Rated temperature: 0 °C ... 80 °C Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Connection type: M12x1, 4-pin Non-linearity: ± 0.2 % (Best Fit Straight Line (BFSL)) Process temperature: -30 °C ... 100 °C Accuracy:
Specification: Part Number 6038777 Protection class III: + Housing material: Stainless steel Process temperature: -30 °C ... 100 °C Wetted parts: Standard: Stainless steel Electrical safety: Short-circuit protection: QA towards M, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M Pressure port: Standard Shock load: 1000 g according to IEC 60068-2-27 (mechanical shock) Vibration load:
Specification: Part Number 6038781 Electrical safety: Short-circuit protection: QA towards M, Overvoltage protection: 36 V DC, Reverse polarity protection: L+ towards M CE-conformity: + Connection type: M12x1, 4-pin Supply voltage: 14 V DC ... 30 V DC Pressure port: Standard Wetted parts: Standard: Stainless steel Accuracy:
Specification: Part Number 6042299 Shock load: 1000 g according to IEC 60068-2-27 (mechanical shock) Protection class III: + Output signal: 4...20 mA Enclosure rating: IP 67 Temperature coefficient in rated temperature range: Mean TC of span ≤ 0.2 % of span / 10 K, Mean TC of zero: ≤ 0.2 % of span / 10 K ( < 0.4 % for pressure ranges ≤ 0.25 bar) Process temperature: -30 °C ... 100 °C Non-repeatability:
Specification: Part Number 6038762 Output signal: 4...20 mA Housing material: Stainless steel Enclosure rating: IP 67 Process connection: G 1/4 A (DIN 3852-E) Seal: Without seal Ambient temperature: -20 °C ... 80 °C Vibration load: 20 g according to IEC 60068-2-6 (vibration under resonance) Connection type: M12x1, 4-pin Electrical safety: Short-circuit protection: QA towards M, Overvoltage protection: 36
Specification: Part Number 6038763 Housing material: Stainless steel Vibration load: 20 g according to IEC 60068-2-6 (vibration under resonance) Ambient temperature: -20 °C ... 80 °C Seal: Without seal Connection type: M12x1, 4-pin Wetted parts: Standard: Stainless steel Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Process conne
Specification: Part Number 6038765 Wetted parts: Standard: Stainless steel CE-conformity: + Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Non-linearity: ± 0.2 % (Best Fit Straight Line (BFSL)) Seal: Without seal Ambient temperature: -20 °C ... 80 °C Measuring range: 0 bar ... 1 bar Accuracy:
Specification: Part Number 6038766 Supply voltage: 10 V DC ... 30 V DC Housing material: Stainless steel Wetted parts: Standard: Stainless steel Seal: Without seal Dielectric strength: 500 V DC, NEC Class 02 power supply (low voltage and low current max. 100 VA even under fault conditions) Output signal: 4...20 mA Response time:
Specification: Part Number 6038767 Pressure type: Absolute pressure Shock load: 1000 g according to IEC 60068-2-27 (mechanical shock) Housing material: Stainless steel Pressure port: Standard Non-linearity: ± 0.2 % (Best Fit Straight Line (BFSL)) Supply voltage: 10 V DC ... 30 V DC Process connection: G 1/4 (female) Electrical safety: Short-circuit protection: QA towards M, Overvoltage protection: 36 V DC, R
Specification: Part Number 6038769 Supply voltage: 14 V DC ... 30 V DC Process connection: G 1/4 (female) Vibration load: 20 g according to IEC 60068-2-6 (vibration under resonance) Housing material: Stainless steel Non-linearity: ± 0.2 % (Best Fit Straight Line (BFSL)) Accuracy:
