Specification: Part Number 1017436 Remark: Associated graphic see "Installation" Power consumption: ≤ 10 mA F: 80 mm Electrical wiring: DC 3-wire Tightening torque, max.: 50 Nm Supply voltage: 10 V DC ... 30 V DC Housing: Short-body Ripple: ≤ 10 % Sensing range Sn: 10 mm Power-up pulse protection: + Thread size: M30 x 1.5 Repeatability: ≤ 3 % Housing material: Metal, Nickel-pla
Specification: Part Number 1017434 Housing: Short-body Enclosure rating: IP 67 A: 10 mm EMC: According to EN 60947-5-2 C: 30 mm Housing length: 40 mm Time delay before availability: ≤ 15 ms B: 30 mm Short-circuit protection: + Tightening torque, max.: 50 Nm Temperature drift (of Sr): ± 10 % Shock/vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm Voltage drop: ≤ 1.5 V Thread length: 4
Specification: Part Number 1017447 Thread length: 25 mm Tightening torque, max.: 50 Nm Connection type: Cable, 3-wire, 2 m Ripple: ≤ 10 % Switching output: NPN Conductor cross-section: 0.5 mm² Wire-break protection: 1 Supply voltage: 10 V DC ... 30 V DC Time delay before availability: ≤ 15 ms Temperature drift (of Sr): ± 10 % EMC: According to EN 60947-5-2 Ambient operating temperature:
Specification: Part Number 1017437 Ambient operating temperature: -25 °C ... 70 °C EMC: According to EN 60947-5-2 C: 30 mm Housing cap material: Plastic Enclosure rating: IP 67 Supply voltage: 10 V DC ... 30 V DC Output current Ia: ≤ 300 mA Shock/vibration: 30 g, 11 ms / 10 ... 55 Hz, 1 mm Thread length: 22 mm Connection type: Connector M12, 4-pin Reverse polarity protection: + F: 120 mm
Specification: Part Number 6041795 Connection type: Connector M12, 4-pin Thread length: 27 mm Housing length: 48.5 mm C: 30 mm Sensing range Sn: 20 mm Current consumption, no load: ≤ 12 mA Short-circuit protection: + Brass (Br): Ca. 0.3 Design: Cylindrical Ripple: ≤ 20 % Repeatability (Ta constant): ± 0.05 mm Enclosure rating: IP 67 Reverse polarity protection: + Stainless
Specification: Part Number 6041796 Output function: Analog Output voltage QA1: S = 0 mm: 0 V/-0 +0,4 V (23 °C), S = 20 mm: +5,2 V/ +-0,4 V (23 °C), S = 40 mm: +10 V/ +-0,4 V (23 °C) Bandwidth: 100 Hz Temperature drift (of Sr): ≤ 10 % Repeat accuracy: 0.6 mm D: 120 mm Output current QA2: S = 0 mm: 4 mA/ +-0,8 mA (23 °C), S = 40 mm: 20 mA/ +-0,8 mA (23 °C) Enclosure rating: IP 67 Stain
Specification: Part Number 1061987 Stainless steel (V2A, 304): 0.8 Process data structure: 1 bit pulse output, 1 bit switching output, 14 bit measured value Ambient operating temperature: -25 °C ... +75 °C D: 18 mm Tightening torque, max.: ≤ 40 Nm Power-up pulse protection: + Supply voltage: 10 V DC ... 30 V DC Minimum response time: Mode acceleration monitoring 1 sec, Mode speed monitoring 50 ms Tempe
Specification: Part Number 1061704 Remark: Associated graphic see "Installation" Output current Ia: ≤ 100 mA Connection type: Connector M12, 4-pin Cycle time: 5 ms Carbon steel St37 (Fe): 1 Repeatability: ≤ 2 % Output Q: Output type (dependant on the adjusted threshold) Short-circuit protection: + Assured sensing range Sa: 8.1 mm Housing cap material: Plastic, PA6 B: 30 mm Hysteresis: 5
Specification: Part Number 6032979 Output function: NO Design: Cylindrical B: 24 mm C: 12 mm Housing material: Metal, Nickel-plated brass Electrical wiring: DC 3-wire Installation type: Non-flush Voltage drop: ≤ 1.2 V Enclosure rating: IP 67 A: 12 mm Thread size: M12 x 1 EMC: According to EN 60947-5-2 F: 32 mm Hysteresis: 2 % ... 10 % Connection type: Cable with JST-connector,
Specification: Part Number 1058622 Supply voltage: 10 V DC ... 30 V DC Stainless steel (V2A, 304): 0.8 Thread size: M18 x 1 EMC: According to EN 60947-5-2 Power consumption: ≤ 10 mA Ambient operating temperature: -25 °C ... +75 °C Output current Ia: ≤ 100 mA Electrical wiring: DC 4-wire Sensing range Sn: 7 mm Cycle time: 2.3 ms Voltage drop: ≤ 2 V Temperature drift (of Sr): ± 10 %
