C4MT-12014ABB04FE0

Specification: Part Number 1207133 Ripple: ≤ 10 % Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing material: Aluminum alloy ALMGSI 0.5 Type: Type 4 (IEC 61496) Protection class: III (EN 61140) Scanning range: 0 m ... 4 m Category: Category 4 (EN ISO 13849) PFHd: Cascaded systems: 1.3  1E-08 (EN ISO 13849) Protective field height: 1,200 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safe state in the event of a fault: At least one OSSD is in the OFF state. Restart interlock: + TM (mission time): 20 a (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Permitted cable length: ≤ 20 m Weight: 420 g Ambient operating temperature: -20 °C ... +55 °C Configuration method: Hard wired Cable length: 700 mm External device monitoring (EDM): + Resolution: 14 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) Switching voltage LOW: 2 V DC Safe SICK device communication via EFI/SDL: - Storage temperature: -25 °C ... +70 °C Cascaded: + Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Display elements: LEDs Automatic beam coding: + Typical range: 0 m ... 5 m Synchronization: Optical, without separate synchronization Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (delivery status): Deactivated Connection type extension connection: Female connector M12, 5-pin Response time: ≤ 17 ms Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock (delivery status): Deactivated Beam coding: + Performance level: PL e (EN ISO 13849) Switching current: 300 mA Connection type: Male connector M12, 5-pin Enclosure rating: IP 65 (EN 60529) Power consumption: ≤ 3 A Conductor cross-section: 0.34 mm²