C4MT-12014ABB03FE0

Specification: Part Number 1207114 PFHd: Standalone system: 4.3  1E-09 (EN ISO 13849) Automatic beam coding: + Cable length: 700 mm Beam coding: + Storage temperature: -25 °C ... +70 °C Ripple: ≤ 10 % Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Permitted cable length: ≤ 20 m Typical range: 0 m ... 5 m Connection type: Male connector M12, 5-pin Restart interlock: + Performance level: PL e (EN ISO 13849) Protection class: III (EN 61140) Restart interlock (delivery status): Deactivated Safe SICK device communication via EFI/SDL: - Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Category: Category 4 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Synchronization: Optical, without separate synchronization Resolution: 14 mm Weight: 420 g External device monitoring (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Power consumption: ≤ 3 A Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) Switching voltage LOW: 2 V DC Response time: ≤ 17 ms Switching current: 300 mA Scanning range: 0 m ... 4 m Cascaded: - Ambient operating temperature: -20 °C ... +55 °C Safe state in the event of a fault: At least one OSSD is in the OFF state. Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Conductor cross-section: 0.34 mm² Air humidity: 15 % ... 95 %, non-condensing Configuration method: Hard wired Display elements: LEDs Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET TM (mission time): 20 a (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 External device monitoring (EDM): + Type: Type 4 (IEC 61496) Protective field height: 1,200 mm Enclosure rating: IP 65 (EN 60529) Housing cross-section (incl. system connection): 15 mm x 32 mm