C2MT-11424BBC04FE0

Specification: Part Number 1207902 Test rate (internal test): 47 /s Connection type extension connection: Female connector M12, 5-pin Display elements: LEDs Air humidity: 15 % ... 95 %, non-condensing External device monitoring (EDM): + Safe SICK device communication via EFI/SDL: - External device monitoring (delivery status): Deactivated Automatic beam coding: + Switching current: 300 mA Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Configuration method: Hard wired Resolution: 24 mm Category: Category 2 (EN ISO 13849) Conductor cross-section: 0.34 mm² Safe state in the event of a fault: At least one OSSD is in the OFF state. Permitted cable length: ≤ 20 m Maximum demand rate: 28 /min (EN ISO 13849) Typical range: 0 m ... 8 m Cable length: 700 mm Scanning range: 0 m ... 6 m Connection type: Male connector M12, 5-pin Shock resistance: 10 g, 16 ms (EN 60068-2-27) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Protection class: III (EN 61140) Synchronization: Optical, without separate synchronization Storage temperature: -25 °C ... +70 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type: Type 2 (IEC 61496) Cascaded: + Restart interlock: + Switching voltage LOW: 2 V DC Response time: ≤ 13 ms Restart interlock (delivery status): Deactivated Housing cross-section (incl. system connection): 15 mm x 32 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Weight: 400 g Enclosure rating: IP 65 (EN 60529) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Beam coding: + Ripple: ≤ 10 % Power consumption: ≤ 3 A Housing material: Aluminum alloy ALMGSI 0.5 Protective field height: 1,140 mm TM (mission time): 20 a (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Ambient operating temperature: -20 °C ... +55 °C Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics!