AFM60A-S1IB018X12

Specification: Part Number 1055331 Flange material: Aluminum Housing material: Aluminum DLR (Device Level Ring): 1 Working temperature range: -30 °C ... +85 °C Shaft material: Stainless steel Bus interface: EtherNet/IP IEC 61784-1 Max. angular acceleration: 500,000 rad/s² Measuring step deviation: ± 0.002 ° Mass: 0.2 kg Operating torque: 0.3 Ncm (+20 °C) Reverse polarity protection: 1 Shaft diameter: 6 mm Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Connection type: 3 x connector M12, 4-pin, axial Max. number of revolutions: 4,096 Max. number of steps per revolution: 262,144 Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Endless operating functionality: 1 Type of mounting shaft: Solid shaft Storage temperature range: -40 °C ... +100 °C, without package EMC: (according to EN 61000-6-2 and EN 61000-6-3) Power consumption max.: 3 W Data transmission rate (baud rate): 10 Mbit/s / 100 Mbit/s Mechanical interface: Solid shaft, Servo flange Resolution: 18 bit x 12 bit Start up torque: 0.5 Ncm (+20 °C) Maximum operating speed: 9,000 /min MTTFd: mean time to dangerous failure: 80 a (EN ISO 13849-1) Resolution power: 262,144 x 4,096 Moment of inertia of the rotor: 6.2 gcm² Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Repeat accuracy: 0.002 ° Initialization time: Ca. 12 s Bearing lifetime: 3.0 x 10^9 revolutions Electrical interface: EtherNet/IP Operating voltage range: 10 V DC ... 30 V DC Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) : Servo flange Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Encoder profile: 0 x 22 RPI (requested packet interval): 5 ms ... 750 ms Error limits: ± 0.03 °