enquiry@onstocktrading.com

Schneider Electric

Image
Part Number
Description
AM-709
Damper Actuator Accessory - Damper Shaft Position Indicator, 3/4"D round shaft, 1/2" square shaft, for Mx40-704x
AM-708
Damper Actuator Accessory - 500 Ohm Resistor, converts 4-20 mA signal to 2 to 10 Vdc signal, for MS40-7043, 7073, 7153, 717x, 6083, 6153, -6343
AM-706
Flush Panel Mount, Min and/or Manual Positioner, 24 Vac/Vdc +/- 20%, 50/60 Hz, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
AM-705
Surface Mount Positioner, NEMA 4 Housing, 24 Vac/Vdc +/- 20%, 50/60 Hz, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
AM-703
Input Scaling Model, 24 Vac/Vdc +/-15% supply voltage, 5 to 95% R.H., snap-track mounting, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
AM-692
Damper Actuator Accessory - V-bolt Kit, includes (2) washers, (2) nuts, (2) V-bolts, use with AM-690 and AM-691, for Mx40-707x, Mx40-7151x
AM-689
Angle of Rotation Limiter, Use Where Damper Does Not Have a Proper End-Stop, For Mx40-707x, Mx40-715x
AM-688
Replacement Universal Clamp For Up to 3/4" Diameter Shafts, Mounts on Mx40-707x, Mx40-715x,
AM-687
The AM-687 universal clamp assembly is used to replace the standard universal clamp assembly
AM-686
Damper Actuator Accessory - Damper Position Indicator for Mx40-707x, Mx40-715x
AM-676
Universal Shaft Extension, 9-1/2"L, Mx40-704x (AM-710 required), -707x, -715x, -717x, MF40-6043, -6083, -6153, -6343, MS40-6043, -6083, -6153, -634x
AM-675
Damper Actuator Accessory - Base Mounting Plate for AM-674, 9-5/16"W x 14-5/16"H
AM-674
Weather Shield, 9-1/2"W x 14-3/8"L x 6"D
AM-673
Mounting Bracket for Multiple Actuators, 12 Gauge Galvanized Steel, 7"W x 3-3/8"H x 5-3/4"D, For Use With Mx4x-704x, Mx4x-715x
AM-672
Universal Mounting "L" Bracket, 12 gauge galvanized steel, 10-1/4""W x 13"H x 6-1/8"D, for use with Mx4x-704x, Mx4x-707x and Mx4x-715x
AM-671
Universal Mounting "L" Bracket, w/side flange, 12 gauge galvanized steel, 11"W x 17"H x 6-1/4"D, for use with Mx4x-704x, Mx4x-707x and Mx4x-715x
AM-610
Multi-Tap Transformer For Use With MF-5xxx 120, 208, 240 , 24V, 40VA, 50/60 Hz
AM-603
Hydralic Actuator Linkage Adapter - Adapts Old MA and MP-5200 Actuators to New Linkages
AM-602
Spacer, Adapts MA and MP-5200-0-0-2 Actuators to Old Linkages
AM-601
Linkage Conversion Kit, Converts Actuator For Damper Applications With 2" Stroke
AM-545
Rod End Connector, With Hole For 5/16" Diameter Rods, For Use With MK-3xxx
AM-543
Shaft Extension, Shaft and Lock Nut 4-3/4" Long x 5/8", For Use With MK-71x1 Actuators
AM-542
Rod End Connector, With Hole For 5/16"D Rods, For Use With MK-71x1
AM-538
Brace Kit, Threaded Rod and Connectors, For Use With MK-71xx Actuators
AM-536
Mounting Kit, Standard With MK-71xx and MK-38xx, Order Separate to Obtain Pivot Mounting of MK-31xx
AM-535
Clevis Kit, 24 UNC Threaded Hole For Actuator Shaft, For Use With MK-33xx, MK-38xx and MK-71xx Actuators
AM-534
Pivot Stud Kit, With Bolts and Washers, For Use With MK-3xxx and MK-71xx Actuators
AM-533
Shaft Extension, Shaft and Lock Nut 4-3/4" Long x 5/8", For Use With MK-3xxx and MK-71xx Actuators
AM-532
Bolt-on Frame Mounting Kit, For Use With MK-71xx Actuators and Pivot Mounted MK-38xx
AM-394
Connecting Link, Two 1/2"D Threaded Rods With Turnbuckle, Two 1/2"D Ball Joint Connectors, For MP-9000
Menu
Mail Us
enquiry@onstocktrading.com