Honeywell

Image
Part Number
Description
30" Ignition Cable Assembly with right angle boot for pilot burner connection
Flange Kit bag assembly, includes 1/2 inch elbow flange, O-ring, 9/64 inch hex screws, and dust plug.
Flange Kit bag assembly, includes 3/4 inch elbow flange, O-ring, 9/64 inch hex screws and 9/64 inch hex wrench
Flange Kit bag assembly, includes 1/2 inch elbow flange, O-ring, 9/64 inch hex screws and 9/64 inch hex wrench
Flange Kit bag assembly, includes 3/4 inch straight flange, O-ring, 9/64 inch hex screws, and dust plug.
ECO adapter with 1/4" x 0.032" quick-connect terminals for VR8200 and VR8300 family.
ECO adapter with 1/4" x 0.032" quick-connect terminals for the V800 or the VS820 family
18 in. ignition cable assembly for use with S86 and S87 family
36 in. ignition cable assembly for S86 and S87 family.
25 in. ignition cable assembly for S86 and S87 family
Single Stage LP to Natural Gas Conversion Kit. 5" to 7" WC adjustment. Includes regulator spring, o-ring, adjustment screw and cap screw
0.020 in. Orifice Assembly (Bulk Pack)
Honeywell 3906864
0.011 in. LP orifice, stamped with BBR11
0.012 in. LP orifice, stamped with BBR12
0.008 in. LP orifice, stamped with GAF8
0.009 in. Orifice Assembly
0.010 in. Orifice Assembly (Bulk Pack)
Compression fitting, 1/8 in. pilot tubing. 1.15" overall length
Compression fitting, 1/8 in. pilot tubing. 0.78" overall length
Compression fitting, 1/4 in. pilot tubing. 1.15" overall length
Compression fitting, 1/4 in. pilot tubing. 0.78" overall length
Jumper Bracket Used With: Multi-Section Dampers
Damper External Drive Pin Kit for Damper with External Actuator Mounting
Retaining Clip, Damper External Drive Pin for Actuator Mounting
Actuator Mounting Plate for Direct Coupled Actuator Mounting
Resistor Kit (500 ohm, converts 4-20mA to 2-10Vdc)
Self-Centering Shaft Adapter Used With S10, S20 Actuators
Cover Plate, 7-7/8x5-1/2 in.,Prem.White®
Menu
Mail Us
enquiry@onstocktrading.com