MHGP 400 - HDmag

Difference of SinCos amplitude ≤20 mV Output stages SinCos 1 Vpp Radial tolerance 0.1...2.2 mm (wheel/head) Protection DIN EN 60529 IP 67 (head) IP 68 (wheel) Voltage supply 4.5...30 VDC Phase shift 90° ±10° Consumption w/o load ≤160 mA Axial tolerance ±3 mm (wheel/head) Sinewave cycles per turn 256...32768 Consumption w/o load ≤160 mA Sensing method Magnetic Voltage supply 4.5...30 VDC MHGP 400 - HDmag output signals A+, B+, R+, A-, B-, R- Pulses per revolution 256...524288 Reference signal Zero pulse, width 90° Emitted interference EN 61000-6-3 Sensing method Magnetic Connection Flange connector M23, 12-pin Accuracy of magnetic measure ±75 ' Scan ratio 40...60 % MHGP 400 - HDmag output signals A+, B+, R+, A-, B-, R- Output stages HTL TTL/RS422 Bandwidth 400 kHz (-3 dB) Size (flange) ø405.4 mm Operating speed ≤2000 rpm DC offset ≤20 mV Reference signal Zero pulse, width 90° Operating temperature -20...+85 °C Harmonics typ. -40 dB manufacter SKU MHGP 400 - HDmag Interference immunity EN 61000-6-2 Output frequency ≤2 MHz Sensor head FPGA signal processing Approval CE Resistance IEC 60068-2-6 Vibration 30 g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms Shaft type ø70...340 mm (through hollow shaft) Phase shift 90° ±5°