MHGP 200 - HDmag

Accuracy of magnetic measure ±150 ' Axial tolerance ±3 mm (wheel/head) Output stages SinCos 1 Vpp Operating temperature -20...+85 °C manufacter SKU MHGP 200 - HDmag Resistance IEC 60068-2-6 Vibration 30 g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms Pulses per revolution 128...262144 Voltage supply 4.5...30 VDC Bandwidth 400 kHz (-3 dB) Size (flange) ø201.7 mm Sinewave cycles per turn 128...16384 Protection DIN EN 60529 IP 67 (head) IP 68 (wheel) Approval CE Connection Flange connector M23, 12-pin Emitted interference EN 61000-6-3 Sensing method Magnetic Reference signal Zero pulse, width 90° Difference of SinCos amplitude ≤20 mV MHGP 200 - HDmag output signals A+, B+, R+, A-, B-, R- Interference immunity EN 61000-6-2 Voltage supply 4.5...30 VDC Sensing method Magnetic Consumption w/o load ≤160 mA Output stages HTL TTL/RS422 Phase shift 90° ±5° Radial tolerance 0.1...2.2 mm (wheel/head) Harmonics typ. -40 dB Reference signal Zero pulse, width 90° MHGP 200 - HDmag output signals A+, B+, R+, A-, B-, R- Output frequency ≤2 MHz Shaft type ø50...180 mm (through hollow shaft) Consumption w/o load ≤160 mA Operating speed ≤4000 rpm DC offset ≤20 mV Phase shift 90° ±10° Scan ratio 40...60 % Sensor head FPGA signal processing