Interference immunity EN 61000-6-2 Isolation class B Shaft type ø8...12 mm (blind hollow shaft) Size (flange) ø52 mm Rotor moment of inertia 0.05 kgcm² Calibration tolerance ±5 % Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Materials Housing: stainless steel / plastic Shaft: stainless steel Protection DIN EN 60529 IP 00 IP 54 (with cove
Rotor moment of inertia 0.95 kgcm² Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Connection Plug-in terminals Reversal tolerance ≤0.1 % Performance 0.3 W (speed ≥5000 rpm) Size (flange) ø89 mm Protection DIN EN 60529 IP 00 IP 44 (with cover) Isolation class B Approval CE Weight approx. 0.6 kg Emitted interference EN 61000-6-3
Weight approx. 0.7 kg Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Rotor moment of inertia 0.95 kgcm² Interference immunity EN 61000-6-2 Open-circuit voltage 10...20 mV per rpm Performance 0.3 W (speed ≥5000 rpm) Calibration tolerance ±5 % Operating temperature -30...+130 °C Size (flange) ø95 mm Connection Connector Torque 0.35 Ncm Isolation class B
Size (flange) ø95 mm Approval CE Torque 0.35 Ncm Rotor moment of inertia 0.95 kgcm² Temperature coefficient ±0.05 %/K (open-circuit) Weight approx. 0.7 kg Shaft type ø12...16 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) manufacter SKU GTB 9.16 Materials Housing: stainless steel / plastic Shaft: stainless steel Isolation class B Operating temperature -30...+
Flange EURO flange B10 Resistance DIN EN 60068-2-6 Vibration 10 g, 10-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms Shaft type ø11 mm solid shaft Protection DIN EN 60529 IP 55 Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Reversal tolerance ≤0.1 % Open-circuit voltage 10...60 mV per rpm manufacter SKU GTF 7.08 Connection Screw terminal connector Materials Housing: stainless
Shaft type ø16 mm (blind hollow shaft) manufacter SKU GTR 9 Calibration tolerance ±5 % Temperature coefficient ±0.05 %/K (open-circuit), optional: 0.005 %/K Connection Connector Interference immunity EN 61000-6-2 Weight approx. 1.1 kg Isolation class B Size (flange) ø95 mm Approval CE Rotor moment of inertia 1.95 kgcm² Operating temperature -30...+130 °C R
Open-circuit voltage 7...15 mV per rpm Materials Housing: plastic, black Shaft: stainless steel Groove frequency fN = 29/30 x n Carbon brush lifetime approx. 40000 Operating hours Rotor moment of inertia 130 gcm² Reversal tolerance ≤0.4 % Polarity Depending on rotational direction Operating speed ≤8000 rpm Number of pole pairs 2 = 4 poles Lower limit of control range 0 rpm Sha
Interference immunity DIN EN 61000-6-2 manufacter SKU KTD 4-... A 4 Y10 Weight approx. 240 g (rotor) 525 g (housing) Rotor moment of inertia 600 gcm² Groove frequency fN = 29/30 x n Linearity tolerance ≤0.15 % Protection DIN EN 60529 IP 54 Carbon brush lifetime approx. 20000 Operating hours Emitted interference DIN EN 61000-6-3 Isolation class B Shaft type ø10...16 mm (bli
Protection DIN EN 60529 IP 65 Transformation ratio 0.5 ±5 % Connection Connector M23 type 2, 12-pin manufacter SKU RTD 1 B14 Y 1 Starting torque ≤0.01 Nm (+20 °C) Interference immunity DIN EN 61000-6-2 Operating temperature -20...+100 °C Resistance DIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 100 g, 11 ms Operating speed ≤10000 rpm Admitted shaft load ≤20 N
Weight approx. 310 g Size (flange) ø58 mm Resistance DIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 100 g, 11 ms manufacter SKU RTD 1 B14 Y 3 Number of pole pairs 1 = 2 poles Interference immunity DIN EN 61000-6-2 Materials Housing: aluminium, black, powder-coated Shaft: stainless steel Operating temperature -40...+100 °C Starting torque ≤0.01 Nm (+20 °C) Prote
manufacter SKU RTD 4 A 4 Y 2 Mounting kit 050 Motor shaft tolerance 0.25 mm axial 0.1 mm radial Number of pole pairs 1 = 2 poles Operating speed ≤8000 rpm Weight approx. 670 g Starting torque ≤0.015 Nm (+20 °C) Shaft type ø10...16 mm (blind hollow shaft) Phase shift 0° ±10° Protection DIN EN 60529 IP 65 Connection Connector M23 type 2, 12-pin Interference immunity
Operating temperature -30...+130 °C Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Protection DIN EN 60529 IP 56 Isolation class B Admitted shaft load ≤40 N axial ≤60 N radial Emitted interference EN 61000-6-3 Torque 1.5 Ncm Rotor moment of inertia 0.25 kgcm² manufacter SKU TDP 0,09 Approval CE Linearity tolerance ≤0.15 % Connection Terminal box Calibrat
Connection 2x terminal box Minimum switching current 100 mA Size (flange) ø115 mm Switching hysteresis =30 % of switching speed Materials Housing: aluminium die-cast Shaft: stainless steel Open-circuit voltage 10...150 mV per rpm Weight approx. 3.2 kg Isolation class B Switching delay time ≤40 ms Temperature coefficient ±0.05 %/K (open-circuit) Switching outputs 1 output, sp
Switching outputs 3 outputs, speed control Calibration tolerance ±1 % Consumption w/o load ≤5 mA Materials Housing: aluminium die-cast Shaft: stainless steel Speed (n) ≤5000 rpm Size (flange) ø115 mm Flange EURO flange B10 Isolation class B Performance 12 W (speed ≥3000 rpm) Rotor moment of inertia 1.4 kgcm² Current each output 40 mA (DC) Voltage supply 12 V
Weight approx. 3.1 kg Range of switching speed (ns) 850...4500 rpm (Δn = 2 rpm/s) Isolation class B Minimum switching current 50 mA Performance 12 W (speed ≥3000 rpm) Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Flange EURO flange B10 Interference immunity EN 61000-6-2 Emitted interference EN 61000-6-3 Temperature coefficient ±0.05 %/K (open-circuit) Approval CE
Linearity tolerance ≤0.15 % Scan ratio 40...60 % Rotor moment of inertia 1.4 kgcm² Operating speed ≤10000 rpm Reversal tolerance ≤0.1 % Armature-circuit time-constant Reference signal Zero pulse, width 90° Operating temperature -30...+100 °C -25...+100 °C (>3072 pulses per revolution) Admitted shaft load ≤60 N axial ≤80 N radial Materials Housing: aluminium die-cast S
Baumer Hubner tachogenerator TDP 0,2 LT-1 B10 55. The main purpose of Baumer tachogenerator is measurement of the direction of rotation and speed via voltage output signal. The rate of this voltage corresponds to the speed of rotation of the shaft. MAIN FEATURES BAUMER HUBNER TDP0,2LT-4B10 55: ø 11 mm Protection: Up to IP55.. Open-circuit voltage: 150 mV per rpm. Linearity tolerance: ≤0.15 %. Reversal tolerance: ≤0.1 %. Operating
Emitted interference EN 61000-6-3 Approval CE Linearity tolerance ≤0.15 % Reversal tolerance ≤0.1 % Protection DIN EN 60529 IP 55 Temperature coefficient ±0.05 %/K (open-circuit) Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Admitted shaft load ≤80 N axial ≤100 N radial Size (flange) ø120 mm ø165 mm ø175 mm manufacter SKU TDP 13 Calibration toler
Tachogenerators TDP 13 Low response time Open circuit voltage 20...200 mV per rpm Solid shaft ø14...18 mm with flange High signal quality due to patented LongLife technology With own bearings No auxiliary energy source required
Tachogenerators TDP 13 Low response time Open circuit voltage 20...200 mV per rpm Solid shaft ø14...18 mm with flange High signal quality due to patented LongLife technology With own bearings No auxiliary energy source required
Baumer Hubner tachogenerator TDP 0,2 LT-4 B10 55. MAIN FEATURES BAUMER HUBNER TDP0,2LT-4B10 55: ø 115 mm Up to IP55 protection. Open-circuit voltage: 60 mV per rpm. Reversal tolerance: ≤0.1 %. Linearity tolerance: ≤0.15 %. Operating temperature: -30...+130 °C. Double silver track. Euro Flange. Easy access to the terminals by a reversible terminal box. Maintenance-free during the life time of the ball bearings. Speed and directio
Protection DIN EN 60529 IP 56 Operating temperature -30...+130 °C Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Admitted shaft load ≤40 N axial ≤60 N radial Emitted interference EN 61000-6-3 Torque 1.5 Ncm Armature-circuit time-constant Rotor moment of inertia 0.29 kgcm² Weight approx. 1.5 kg Linearity tolerance ≤0.15 % Interference immunity EN 61000-6-2 O
