PBS-RB4X0SGESSCD5A0Z

Specification: Part Number 6038900 Power consumption: 45 mA (for configurations without analog output signal), 70 mA (for configurations with analog output signal) Storage temperature: -20 °C ... +80 °C Absolute pressure: 0 bar ... 1 bar up to 0 bar ... 25 bar Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance) Output signal: 2 x PNP + 4 mA ... 20 mA Medium: Liquid and gaseous media Display: 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: &le; 1 % of span ± 1 digit Electrical safety: Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M Process connection: G ½ B according to EN 837 Rated temperature range: 0 °C ... +80 °C Relative humidity: &le; 90 % Wetted parts: Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) Connection type: Round connector M12 x 1, 5-pin, IP 67 Seal: Copper Service life: Minimum 100 Mio. life cycles Pressure type: Gauge pressure Response time: 3 ms Weight sensor: Ca. 200 g Isolation voltage: 500 V DC Non-linearity: &le; ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) Gauge pressure: 0 bar ... 1 bar up to bar ... 600 bar Long-term drift/one-year stability: &le; 0.2 % of span according to IEC 61298-2 Enclosure rating: IP 67 Setting accuracy of switching outputs: &le; ± 0.5 % of span Ambient temperature: -20 °C ... +80 °C Housing material: Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 Shock load: 50 g according to IEC 60068-2-27 (mechanical shock) CE-conformity: Pressure equipment directive: This instrument is a pressure accessory as defined by the directive 97/23/EC, EMC directive: 2004/108/EC, EN 61326-2-3 Accuracy: &le; ± 1 % of span, (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) Process temperature: -20 °C ... +85 °C Protection class III: + Total current consumption: Max. 350 mA / 570 mA (incl. switching current) Internal transmission fluid: Silicone oil (only with pressure ranges < 0 bar ... 10 bar and &le; 0 bar abs ... 25 bar abs) Pressure port: Standard Zero point adjustment: Max. + 3 % of span Temperature coefficient in rated temperature range: Mean TC of span &le; 0.2 % of span / 10 K, Mean TC of zero: &le; 0.2% of span / 10 K Measuring range: 0 bar ... 4 bar Compound pressure: -1 bar ... 0 bar up to -1 bar ... +24 bar Rotatable housing: Display against housing with electrical connection: 330 °, Housing against process connection: 320 °