PBS-CB1X0SG1SSNCMA0Z

Specification: Part Number 6044603 Total current consumption: Max. 350 mA / 570 mA (incl. switching current) CE-conformity: Pressure equipment directive: This instrument is a pressure accessory as defined by the directive 97/23/EC, EMC directive: 2004/108/EC, EN 61326-2-3 Pressure port: Standard Pressure type: Compound pressure Shock load: 50 g according to IEC 60068-2-27 (mechanical shock) Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance) Power consumption: 45 mA (for configurations without analog output signal), 70 mA (for configurations with analog output signal) Process temperature: -20 °C ... +85 °C Relative humidity: &le; 90 % Temperature coefficient in rated temperature range: Mean TC of span &le; 0.2 % of span / 10 K, Mean TC of zero: &le; 0.2% of span / 10 K Accuracy: &le; ± 1 % of span, (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) Enclosure rating: IP 67 Connection type: Round connector M12 x 1, 4-pin, IP 67 Gauge pressure: 0 bar ... 1 bar up to bar ... 600 bar Rotatable housing: Display against housing with electrical connection: 330 °, Housing against process connection: 320 ° Setting accuracy of switching outputs: &le; ± 0.5 % of span Housing material: Display window: PC, Plastic head: PC + ABS, Buttons: TPE-E, Lower body: stainless steel 304 Absolute pressure: 0 bar ... 1 bar up to 0 bar ... 25 bar Non-linearity: &le; ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) Seal: NBR Ambient temperature: -20 °C ... +80 °C Display: 14-segment-LED, blue, 4-digits, height 9 mm, electronically turnable by 180°, Update: 1,000, 500, 200, 100 ms (adjustable), Accuracy: &le; 1 % of span ± 1 digit Process connection: G ¼ A according to DIN 3852-E Storage temperature: -20 °C ... +80 °C Rated temperature range: 0 °C ... +80 °C Output signal: 1 x PNP + 0 V ... 10 V Compound pressure: -1 bar ... 0 bar up to -1 bar ... +24 bar Wetted parts: Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) Internal transmission fluid: Silicone oil (only with pressure ranges < 0 bar ... 10 bar and &le; 0 bar abs ... 25 bar abs) Electrical safety: Short-circuit protection: QA, Q1, Q2 towards M, Protection class: III, Overvoltage protection: 40 V DC, Reverse polarity protection: L+ towards M Medium: Liquid and gaseous media Zero point adjustment: Max. + 3 % of span Service life: Minimum 100 Mio. life cycles Long-term drift/one-year stability: &le; 0.2 % of span according to IEC 61298-2 Protection class III: + Weight sensor: Ca. 200 g Response time: 3 ms Measuring range: -1 bar ... 0 bar Isolation voltage: 500 V DC