PAC50-AGD

Specification: Part Number 1062948 Pressure type: Gauge pressure Relative humidity: &le; 90 % Non-repeatability: &le; ± 0.2 % of span Diagnostics output: Switching output 2 can be set as diagnostics output Output signal: IO-Link/PNP + PNP/NPN/Push-Pull Power consumption: Max. 40 mA at L+ = 24 VDC Process connection: 2 x G ¼ Gauge pressure: -1 bar ... 0 bar; -1 bar ... +1 bar; 0 bar ... +6 bar; 0 bar ... +10 bar RoHS certificate: + Accuracy: &le; ± 1.5 % of span (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)), &le; ± 2 % of span incl. temperature error (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) Non-linearity: &le; ± 0.5 % (of span (Best Fit Straight Line, BFSL) according to IEC 61298-2) CE-conformity: EMC directive: 2004/108/EC, EN 61326-2-3 Protection class III: + Electrical safety: Short-circuit protection: QA, Q1, Q2 towards M and L+, Protection class: III, Overvoltage protection: 32 V DC, Reverse polarity protection: L+ towards M Ambient temperature: 0 °C ... +60 °C CULus certificate: - Setting accuracy of switching outputs: &le; ± 0.2 % of span Shock load: Max. 30 g, xyz according to IEC 60068-2-27 (11 ms, mechanical shock) Rated temperature range: +10 °C ... +60 °C Enclosure rating: IP 65 / IP 67 According to IEC 60529 Analog signal output and ohmic load RA: Load resistance for voltage output > 3 kOhm, Load resistance for current output < 600 Ohm, Optional, 4 mA ... 20 mA / 0 V… 10 V. Automatic detection depending on connected load or programmable. Output signals can be inverted: 20 mA … 4 mA / 10 V … 0 V Initialization time: 300 ms Weight sensor: Ca. 40 g Zero point adjustment: Max. + 5 % of span CRUus certificate: + Measuring range: -1 bar ... 0 bar Housing material: Seals: NBR, Housing: polycarbonate, DIN rail mounting: POM, Buttons: TPE Storage temperature: -20 °C ... +80 °C Vibration load: Max. 5 g (10 ... 150 Hz), xyz, according to DIN EN 60068-2-6 Medium: Dry compressed air Display: Update: 1,000, 500, 200, 100 ms (adjustable), Pressure display: 4 digits, 16 segments, Pressure unit in display can be switched: bar, MPa, kPa, psi and inHg, LCD with LED backlight (green/red), can be rotated electronically by 180° Process temperature: 0 °C ... +60 °C