LFP4000-E4BMB

Specification: Part Number LFP4000-E4BMB Signal voltage LOW: &le; 2 V Process connection: G ¾ A Response time: < 400 ms RoHS certificate: + Maximum level change: 500 mm/s Inductive load: < 1 H Capacitive load: 100 nF IO-Link: + GOST approval: + Inactive area at process connector: 25 mm Protection class: III CULus certificate: + Power consumption: &le; 100 mA at 24 V DC without output load Design: Remote amplifier, cable length 1 m Connection type: Round connector M12 x 1, 5-pin Resolution: < 2 mm Wetted parts: 1.4404, PTFE Probe length: 4,000 mm Medium: Fluids Process temperature: -20 °C ... +100 °C Process pressure: -1 bar ... 10 bar Probe type: Rope probe Enclosure rating: IP 67: EN 60529 EMC: EN 61326-1:2006, 2004/108/EG Length coaxial cable: 1 m, PVC Ambient temperature operation: -20 °C ... +60 °C Ambient temperature coaxial cable: -20 °C ... +60 °C Supply voltage: 12 V DC ... 30 V DC Ambient storage temperature: -40 °C ... +80 °C Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe MTTF: 194.3 a (EN ISO 13849-1) Accuracy of sensor element: ± 5 mm Inactive area at probe end: 10 mm Hysteresis: Min. 2 mm, free adjustable Output current: < 100 mA Repeatability: &le; 2 mm Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Conductivity: No limitation Max.probe load: 6 Nm Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Temperature drift: < 0.1 mm/K Measurement: Switch, Continuous Housing material: Plastic PBT Lower signal level: 3.8 mA ... 4 mA Signal voltage HIGH: Vs - 2 V Upper signal level: 20 mA ... 20.5 mA Initialization time: &le; 5 s