LFP2000-F4NMB

Specification: Part Number 1066791 Protection class: III Medium: Fluids Wetted parts: 1.4404, PTFE Lower signal level: 3.8 mA ... 4 mA Process temperature: -20 °C ... +100 °C Power consumption: &le; 100 mA at 24 V DC without output load MTTF: 194.3 a (EN ISO 13849-1) Supply voltage: 12 V DC ... 30 V DC Output current: < 100 mA Process pressure: -1 bar ... 10 bar EMC: EN 61326-1:2006, 2004/108/EG Max.probe load: 6 Nm Ambient temperature operation: -20 °C ... +60 °C Temperature drift: < 0.1 mm/K Process connection: ¾" NPT Design: Standard Repeatability: &le; 2 mm Signal voltage HIGH: Vs - 2 V Inductive load: < 1 H Connection type: Round connector M12 x 1, 5-pin Accuracy of sensor element: ± 5 mm Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Resolution: < 2 mm Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Response time: < 400 ms Measurement: Switch, Continuous Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Hysteresis: Min. 2 mm, free adjustable IO-Link: + Probe type: Rope probe Inactive area at probe end: 10 mm CULus certificate: + Ambient storage temperature: -40 °C ... +80 °C GOST approval: + Signal voltage LOW: &le; 2 V Conductivity: No limitation Enclosure rating: IP 67: EN 60529 Initialization time: &le; 5 s Capacitive load: 100 nF RoHS certificate: + Housing material: Plastic PBT Probe length: 2,000 mm Maximum level change: 500 mm/s Upper signal level: 20 mA ... 20.5 mA Inactive area at process connector: 25 mm