LFP2000-A4NMB

Specification: Part Number 1057091 Medium: Fluids CULus certificate: + Process pressure: -1 bar ... 10 bar Initialization time: &le; 5 s Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Repeatability: &le; 2 mm Protection class: III Inactive area at process connector: 25 mm Max.probe load: 6 Nm Probe length: 2,000 mm Housing material: Plastic PBT Lower signal level: 3.8 mA ... 4 mA Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Output current: < 100 mA Resolution: < 2 mm Accuracy of sensor element: ± 5 mm Capacitive load: 100 nF Measurement: Switch, Continuous Upper signal level: 20 mA ... 20.5 mA MTTF: 194.3 a (EN ISO 13849-1) Ambient storage temperature: -40 °C ... +80 °C Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Conductivity: No limitation Wetted parts: 1.4404, PTFE Connection type: Round connector M12 x 1, 5-pin Inactive area at probe end: 10 mm Signal voltage LOW: &le; 2 V Design: Standard Maximum level change: 500 mm/s GOST approval: + Temperature drift: < 0.1 mm/K Inductive load: < 1 H Probe type: Mono rod probe RoHS certificate: + Power consumption: &le; 100 mA at 24 V DC without output load Process temperature: -20 °C ... +100 °C Ambient temperature operation: -20 °C ... +60 °C Signal voltage HIGH: Vs - 2 V Enclosure rating: IP 67: EN 60529 Process connection: G ¾ A IO-Link: + Response time: < 400 ms Hysteresis: Min. 2 mm, free adjustable Supply voltage: 12 V DC ... 30 V DC EMC: EN 61326-1:2006, 2004/108/EG