LFP0400-A4NMB

Specification: Part Number 1057075 Inactive area at probe end: 10 mm Supply voltage: 12 V DC ... 30 V DC Ambient temperature operation: -20 °C ... +60 °C Conductivity: No limitation CULus certificate: + Wetted parts: 1.4404, PTFE Upper signal level: 20 mA ... 20.5 mA EMC: EN 61326-1:2006, 2004/108/EG Protection class: III Max.probe load: 6 Nm Hysteresis: Min. 2 mm, free adjustable Medium: Fluids Accuracy of sensor element: ± 5 mm Initialization time: &le; 5 s MTTF: 194.3 a (EN ISO 13849-1) Process temperature: -20 °C ... +100 °C Temperature drift: < 0.1 mm/K Output current: < 100 mA IO-Link: + Lower signal level: 3.8 mA ... 4 mA Probe length: 400 mm Design: Standard Maximum level change: 500 mm/s Enclosure rating: IP 67: EN 60529 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V GOST approval: + Measurement: Switch, Continuous Probe type: Mono rod probe Signal voltage LOW: &le; 2 V Inductive load: < 1 H Resolution: < 2 mm Housing material: Plastic PBT Repeatability: &le; 2 mm Capacitive load: 100 nF Signal voltage HIGH: Vs - 2 V RoHS certificate: + Process connection: G ¾ A Ambient storage temperature: -40 °C ... +80 °C Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Inactive area at process connector: 25 mm Response time: < 400 ms Process pressure: -1 bar ... 10 bar Connection type: Round connector M12 x 1, 5-pin Power consumption: &le; 100 mA at 24 V DC without output load Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load.